[PATCH v2 2/2] memory: mtk-smi: Add support for MT6795 Helio X10

Yong Wu yong.wu at mediatek.com
Tue May 17 02:44:07 PDT 2022


On Tue, 2022-05-17 at 10:27 +0200, AngeloGioacchino Del Regno wrote:
> Il 17/05/22 08:37, Yong Wu ha scritto:
> > On Fri, 2022-05-13 at 17:06 +0200, AngeloGioacchino Del Regno
> > wrote:
> > > The MediaTek Helio X10 (MT6795) SoC has 5 LARBs and one common
> > > SMI
> > > instance without any sub-common and without GALS.
> > > 
> > > While the smi-common configuration is specific to this SoC, on
> > > the
> > > LARB side, this is similar to MT8173, in the sense that it
> > > doesn't
> > > need the port in LARB, and the register layout is also compatible
> > > with that one, which makes us able to fully reuse the smi-larb
> > > platform data struct that was introduced for MT8173.
> > > 
> > > Signed-off-by: AngeloGioacchino Del Regno <
> > > angelogioacchino.delregno at collabora.com>
> > > ---
> > >   drivers/memory/mtk-smi.c | 17 +++++++++++++++++
> > >   1 file changed, 17 insertions(+)
> > > 
> > > diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> > > index 86a3d34f418e..7e7c3ede19e4 100644
> > > --- a/drivers/memory/mtk-smi.c
> > > +++ b/drivers/memory/mtk-smi.c
> > > @@ -21,11 +21,13 @@
> > >   /* SMI COMMON */
> > >   #define SMI_L1LEN			0x100
> > >   
> > > +#define SMI_L1_ARB			0x200
> > >   #define SMI_BUS_SEL			0x220
> > >   #define SMI_BUS_LARB_SHIFT(larbid)	((larbid) << 1)
> > >   /* All are MMU0 defaultly. Only specialize mmu1 here. */
> > >   #define F_MMU1_LARB(larbid)		(0x1 <<
> > > SMI_BUS_LARB_SHIFT(larbid))
> > >   
> > > +#define SMI_FIFO_TH0			0x230
> > 
> > Does the name come from the coda you got?
> > It is called SMI_READ_FIFO_TH in my coda.
> > 
> 
> Documentation for this SoC is not public and I have no access to it,
> so
> everything that you see here comes from reading downstream kernel
> code :-(
> 
> I'll change the name to SMI_READ_FIFO_TH as suggested, thanks!
> 
> > >   #define SMI_M4U_TH			0x234
> > >   #define SMI_FIFO_TH1			0x238
> > >   #define SMI_FIFO_TH2			0x23c
> > > @@ -360,6 +362,7 @@ static const struct of_device_id
> > > mtk_smi_larb_of_ids[] = {
> > >   	{.compatible = "mediatek,mt2701-smi-larb", .data =
> > > &mtk_smi_larb_mt2701},
> > >   	{.compatible = "mediatek,mt2712-smi-larb", .data =
> > > &mtk_smi_larb_mt2712},
> > >   	{.compatible = "mediatek,mt6779-smi-larb", .data =
> > > &mtk_smi_larb_mt6779},
> > > +	{.compatible = "mediatek,mt6795-smi-larb", .data =
> > > &mtk_smi_larb_mt8173},
> > >   	{.compatible = "mediatek,mt8167-smi-larb", .data =
> > > &mtk_smi_larb_mt8167},
> > >   	{.compatible = "mediatek,mt8173-smi-larb", .data =
> > > &mtk_smi_larb_mt8173},
> > >   	{.compatible = "mediatek,mt8183-smi-larb", .data =
> > > &mtk_smi_larb_mt8183},
> > > @@ -541,6 +544,13 @@ static struct platform_driver
> > > mtk_smi_larb_driver = {
> > >   	}
> > >   };
> > >   
> > > +static const struct mtk_smi_reg_pair
> > > mtk_smi_common_mt6795_init[SMI_COMMON_INIT_REGS_NR] = {
> > > +	{SMI_L1_ARB, 0x1b},
> > > +	{SMI_M4U_TH, 0xce810c85},
> > > +	{SMI_FIFO_TH1, 0x43214c8},
> > > +	{SMI_FIFO_TH0, 0x191f},
> > > +};
> > > +
> > >   static const struct mtk_smi_reg_pair
> > > mtk_smi_common_mt8195_init[SMI_COMMON_INIT_REGS_NR] = {
> > >   	{SMI_L1LEN, 0xb},
> > >   	{SMI_M4U_TH, 0xe100e10},
> > > @@ -565,6 +575,12 @@ static const struct mtk_smi_common_plat
> > > mtk_smi_common_mt6779 = {
> > >   		    F_MMU1_LARB(5) | F_MMU1_LARB(6) |
> > > F_MMU1_LARB(7),
> > >   };
> > >   
> > > +static const struct mtk_smi_common_plat mtk_smi_common_mt6795 =
> > > {
> > > +	.type	  = MTK_SMI_GEN2,
> > > +	.bus_sel  = BIT(0),
> > 
> > Like the other larbs, use F_MMU1_LARB(0) here?
> > 
> 
> I agree that F_MMU1_LARB(0) == (1 << (0 << 1)) == BIT(0), but that
> would
> not be correct and induce other people to mistake, I think?

F_MMU1_LARB(x) means larbx enter MMU1. this is correct for me.

OK. Maybe the macro name is not good. About the macro background,
please see:
567e58cf96dd (memory: mtk-smi: Add bus_sel for mt8183)

If you have better name for this, please tell me:)

> Downstream doesn't do MMU1 bits, but MMU0 in this case... but if you
> can
> check on internal documentation and confirm that the downstream
> kernel's
> logic is wrong on that - and that you've verified that this should 

I don't know the detailed downstream code, But I find a internal branch
about this SoC. I see the bus_sel did set to 0x1 as you did here. thus
I don't think the downstream kernel is wrong. 0x1 means larb0 enter
MMU1 while the others still enter MMU0. we could use F_MMU1_LARB(0)
here.

> indeed
> be F_MMU1_LARB(x), you'll get a big(bigger) thank you from me :-)
> 
> Meanwhile...
> 
> Thanks!
> Angelo
> 
> > 
> > After the two changes,
> > 
> > Reviewed-by: Yong Wu <yong.wu at mediatek.com>
> > 
> > Thanks.


More information about the linux-arm-kernel mailing list