[RFC PATCH v2 00/27] DRM.debug on DYNAMIC_DEBUG, add trace events
Jim Cromie
jim.cromie at gmail.com
Mon May 16 15:56:13 PDT 2022
DRM.debug API is 23 macros, issuing 10 exclusive categories of debug
messages. By rough count, they are used 5140 times in the kernel.
These all call drm_dbg or drm_devdbg, which call drm_debug_enabled(),
which checks bits in global __drm_debug. Some of these are page-flips
and vblanks, and get called often.
DYNAMIC_DEBUG (with CONFIG_JUMP_LABEL) is built to avoid this kind of
work, with NOOPd jump/callsites.
This patchset is RFC because:
- it touches 2.5 subsystems: dyndbg, drm, tracefs (new events)
- dyndbg class support is built for drm, needs it for validation
- new api, used by drm
- big memory impact, with 5100 new pr-debug callsites.
- drm class bikeshedding opportunities
- others, names etc.
DYNAMIC_DEBUG:
Adapt to directly represent 32 exclusive classes / categories.
All existing users get _CLASS_DFLT:31, reserving 0-30 for opt-in.
dynamic_debug_register_classes(): Tells dyndbg that caller/client is
using .class_id's 0..N, and wants them exposed and manipulatable with
names: DRM_UT_KMS etc.
Client invokes DYNAMIC_DEBUG_CLASSES to define the name->id map,
then registers it during its initialization.
Then, when a dyndbg command-query has "class FOO":
echo class DRM_UT_KMS +p > /proc/dynamic_debug/control
ddebug_change() will 1st ddebug_validate_classname() for each module,
using its registered class-maps; only modules which know DRM_UT_KMS
will get those callsite adjustments. This "protects" each module's
class-id space, unlike "class 4" query syntax.
Add bitmap support for:
echo 0x02 > /sys/module/drm/parameters/debug
Add symbolic bitmap, because we have the class-names:
echo +DRM_UT_KMS,+DRM_UT_ATOMIC > /sys/module/drm/parameters/debug
Add test_dynamic_debug, to prove out the API.
which is (used 3x to prove class-id ranges):
- DYNAMIC_DEBUG_CLASSES(var, ... [3 class-name-literals each])
- dynamic_debug_register_classes(var)
- dynamic_debug_unregister_classes(var)
also (6x):
+module_param_cb(<node-name>, ¶m_ops_dyndbg_classes, /[pt][123]_bitmap/, 0600);
Bits 0,1,2 of each of the 6 bitmaps control the 3 named classes in
each of 3 groups, toggling their p,T bits respectively.
RFC:
dynamic_debug_register_classes() cannot act early enough to be in
effect at module-load. So this will not work as you'd reasonably
expect:
modprobe test_dynamic_debug dyndbg='+pfm; class FOO +pfmlt'
The 1st query:+pfm will be enabled during load, but in the 2nd query,
"class FOO" will be unknown at load time. Early class enablement
would be nice. DYNAMIC_DEBUG_CLASSES is a static initializer, which
is certainly early enough, but Im missing a trick, suggestions?
Wildcarding on classname is possible, maybe useful:
echo +DRM_UT_\* > /sys/module/drm/parameters/debug
If contemplated in earnest, it should consider the difference between
"DRM_*" and "*_KMS", wrt observing across class hierarchies, as well
as decide whether that echo means 1st match, or all matching names.
__pr_debug_cls(cls, fmt,...) is just for testing, drm doesnt need it.
DRM adaptation:
Basically, these patches add another layer of macro indirection, which
by CONFIG_DRM_USE_DYNAMIC_DEBUG=y, wraps drm_*dbg() in dyndbg's callsite
Factory macro, and adds the new descriptor arg to the funcs.
With these patches, drm.debugs appear as controllable *pr-dbg* callsites:
[ 11.804352] dyndbg: register_classes: drm
[ 11.920715] dyndbg: 234 debug prints in module drm_kms_helper
[ 11.932135] dyndbg: 2 debug prints in module ttm
[ 11.936119] dyndbg: 8 debug prints in module video
[ 12.537543] dyndbg: 1756 debug prints in module i915
[ 12.555045] dyndbg: register_classes: i915
[ 12.666727] AMD-Vi: AMD IOMMUv2 functionality not available on this ..
[ 13.735310] dyndbg: 3859 debug prints in module amdgpu
amdgpu's large count includes:
582 direct uses/mentions of pr_debug
43 defns of DC_LOG_*, which use either pr_debug or DRM_DEBUG_*
~1000 uses of DC_LOG_*
1116 uses of dml_print in drivers/gpu/drm/amd
15 drm_dbg_\\w+ drivers/gpu/drm/amd
273 DRM_DEBUG_\\w+ drivers/gpu/drm/amd
i915 has:
1072 drm_dbg_\\w+ drivers/gpu/drm/i915/ | wc -l
200 DRM_DEBUG_\\w+ drivers/gpu/drm/i915/
46 pr_debug drivers/gpu/drm/i915/
144 gvt_dbg_\\w+ drivers/gpu/drm/i915/gvt, using pr_debug
This impacts the data footprint, so everything new/drm is dependent on
DRM_USE_DYNAMIC_DEBUG=y.
RFC for DRM:
- decoration flags "fmlt" do not work on drm_*dbg().
(drm_*dbg() dont use pr_debug, they *become* one flavor of them)
this could (should?) be added, and maybe tailored for drm.
some of the device prefixes are very long, a "d" flag could optionalize them.
- api use needs review wrt drm life-cycle.
enum drm_debug_category and DYNAMIC_DEBUG_CLASSES could be together?
- class-names could stand review, perhaps extension
"drm:core:" etc have appeared (maybe just from me)
or a "plan" to look at it later
- i915 & amdgpu have pr_debugs (DC_LOG_*, gvt_dbg_*) that have
class-ish prefixes that are separate from, but similar to DRM_UT_*,
and could stand review and possible unification with reformed or
extended drm categories.
- the change to enum drm_debug_category from bitmask values to 0..31
means that we foreclose this possiblility:
drm_dbg(DRM_UT_CORE|DRM_UT_KMS, "wierd double-cat experiment");
- nouveau has very few drm.debug calls,
has NV_DEBUG, VMM_DEBUG, nvkm_printk_, I havent looked deeply.
DYNDBG/DRM -> TRACEFS
My 1st try was motivated by Sean Paul's patch - DRM.trace:
https://patchwork.freedesktop.org/patch/445549/?series=78133&rev=5
Those used trace_printk, so were not good for upstream.
Vincent Whitchurch's code:
https://lore.kernel.org/lkml/20200721141105.16034-1-vincent.whitchurch@axis.com/
added similar features, by sending printk:console events from dyndbg.
It met with a good reception from Steve Rostedt, so I re-started with
that.
The biggest addition (from UI viewpoint) is 4 new trace-events, 2 each
from dyndbg (pr_debug, dev_dbg) and drm (drm_dbg, drm_dev_dbg); 2 have
dev, other 2 avoid storing nulls. Im unsure that 4 distinctions is
valuable, but it seemed most obvious to reflect them straight thru to
tracefs.
RFC: the event/message formats are a bit of a mash-up;
in /sys/kernel/tracing:
drm/drm_debug/format:print fmt: "%s", __get_str(msg)
drm/drm_devdbg/format:print fmt: "cat:%d, %s %s", \
REC->drm_debug_category, dev_name(REC->dev), __get_str(msg)
The 1st prints just the mesg itself, 2nd prints category as int;
it'd be better if DRM.class-name replaced (not just augmented) the
event-name "drm_devdbg" in the trace, is that possible ?
dyndbg/prdbg/format:
print fmt: "%s.%s %s", REC->desc->modname, REC->desc->function, __get_str(msg)
dyndbg/devdbg/format:
print fmt: "%s.%s %s", REC->desc->modname, REC->desc->function, __get_str(msg)
These add a prefix string similar to dyndbg's decorations, except they
don't use dyndbg's "fmlt" decoration flags.
There are also 3 vblank trace-events already,
declared in: drivers/gpu/drm/drm_trace.h
15:TRACE_EVENT(drm_vblank_event,
35:TRACE_EVENT(drm_vblank_event_queued,
52:TRACE_EVENT(drm_vblank_event_delivered,
STATUS
kernel-test-robot tested this patchset (on 5.18-rc6).
github:[jimc:blead] BUILD SUCCESS 6c59e52ac81dd81ac7da4522a5e15b7ac488d5b5
May 15, 2022, 8:39 AM (1 day ago)
Ive been testing, mostly on virtme, mostly with this:
#!/bin/bash
# test class FOO handling of dynamic-debug
alias lmt='modprobe test_dynamic_debug dyndbg=+pmf'
alias rmt='rmmod test_dynamic_debug'
alias look='grep test_dynamic_debug /proc/dynamic_debug/control'
lookfor() {
grep $1 /proc/dynamic_debug/control
}
vx() {
echo $* > /sys/module/dynamic_debug/parameters/verbose
}
# amdgpu has ~2200 pr-debugs (before drm-debug-on-dyndbg),
# use them to prove modprobe <mod> dyndbg=+p works
test_param_dyndbg() {
modprobe amdgpu dyndbg=+pfm
let count=$(grep =pmf /proc/dynamic_debug/control | grep amdgpu | wc -l)
if [ $count -gt 200 ] ; then
echo amdgpu has $count pr-dbgs
return 0
else
echo failed $count
return -1
fi
}
out=$(test_param_dyndbg)
echo out:$out $?
[ $? -eq 0 ] || exit $?
qry_cmd() {
echo "QCMD: $* >control" >&2
echo $* > /proc/dynamic_debug/control
}
# enable dyndbg tracing
dynable() {
grep -P \\d $SKT/events/dyndbg/{.,*}/enable
echo 1 > $SKT/events/dyndbg/enable
grep -P \\d $SKT/events/dyndbg/{.,*}/enable
}
# enable drm tracing
drmable() {
grep -P \\d $SKT/events/drm/{.,*}/enable
echo 1 > $SKT/events/drm/enable
grep -P \\d $SKT/events/drm/{.,*}/enable
}
function doit() {
cat /sys/module/test_dynamic_debug/parameters/do_prints
}
# test class FOO behavior of test_dynamic_debug module
ttest_module__() {
flg=$1
dmesg -C
modprobe test_dynamic_debug dyndbg=+pfm
doit
for cls in FOO BAR BUZZ; do
qry_cmd module test_dynamic_debug class $cls $flg
doit
done
doit
for cls in Foo Bar Buzz; do
qry_cmd module test_dynamic_debug class $cls $flg
doit
done
doit
for cls in bing bong boom; do
qry_cmd module test_dynamic_debug class $cls $flg
doit
done
doit
dmesg | grep class
}
ttest_module() {
ttest_module__ +p
ttest_module__ -p
#ttest_module__ +T
#ttest_module__ -T
}
#dynable
#drmable
ttest_module
grep test_dyn /proc/dynamic_debug/control
# use/test bitmaps
set_tddm_() {
val=$1;
knob=$2;
echo "TDDM: $val >$knob" >&2
echo $val > /sys/module/test_dynamic_debug/parameters/$knob
cat /sys/module/test_dynamic_debug/parameters/$knob
}
CLS_1="FOO -FOO +FOO -FOO BAR -BAR +BAR -BAR BUZZ -BUZZ +BUZZ -BUZZ"
CLS_2=" Foo Bar Buzz -Foo -Bar -Buzz +Foo +Bar +Buzz -Foo -Bar -Buzz"
CLS_3=" bing bong boom -bing -bong -boom +bing +bong +boom -bing -bong -boom"
tddm_sysnode_classes__() {
targ=$1
shift
cls=$*
for bitsym in $cls;
do
set_tddm_ $bitsym $targ
done
}
# work all 3 sysfs bitmaps
for sysnode in c1_syslog_bits c2_syslog_bits c3_syslog_bits;
do
for val in 0 1 2 4 8 0;
do
tddm_sysnode_classes__ $sysnode $val
done
done
tddm_sysnode_classes__ c1_syslog_bits $CLS_1
tddm_sysnode_classes__ c2_syslog_bits $CLS_2
tddm_sysnode_classes__ c3_syslog_bits $CLS_3
echo "show unknown: c3-names on c1-knob" >&2
tddm_sysnode_classes__ c1_trace_bits $CLS_3
echo "flags look inverted" >&2
tddm_sysnode_classes__ c1_syslog_bits $CLS_1
CLS_1_=FOO,-FOO,+FOO,-FOO,BAR,-BAR,+BAR,-BAR,BUZZ,-BUZZ,+BUZZ,-BUZZ
CLS_2_=Foo,Bar,Buzz,-Foo,-Bar,-Buzz,+Foo,+Bar,+Buzz,-Foo,-Bar,-Buzz
# leading err doesnt wreck the rest
CLS_3_=,bing,bong,boom,-bing,-bong,-boom,+bing,+bong,+boom,-bing,-bong,-boom
tddm_sysnode_classes__ c1_syslog_bits $CLS_1_
tddm_sysnode_classes__ c2_syslog_bits $CLS_2_
tddm_sysnode_classes__ c3_syslog_bits $CLS_3_
Cc: Sean Paul <seanpaul at chromium.org>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Cc: David Airlie <airlied at gmail.com>
Cc: Jani Nikula <jani.nikula at linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
Cc: Pekka Paalanen <ppaalanen at gmail.com>
Cc: Rob Clark <robdclark at gmail.com>
Cc: Steven Rostedt <rostedt at goodmis.org>
Cc: Thomas Zimmermann <tzimmermann at suse.de>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Steven Rostedt <rostedt at goodmis.org>
Jim Cromie (27):
dyndbg: fix static_branch manipulation
dyndbg: show both old and new in change-info
dyndbg: fix module.dyndbg handling
dyndbg: drop EXPORTed dynamic_debug_exec_queries
dyndbg: add exclusive class_id to pr_debug callsites
dyndbg: add dynamic_debug_(un)register_classes
dyndbg: validate class FOO on module
dyndbg: add drm.debug style bitmap support
Doc/dyndbg: document new class class_name query support
dyndbg: let query-modname override defaulting modname
dyndbg: support symbolic class-names in bitmap
dyndbg: change zero-or-one classes-map to maps list
dyndbg: add __pr_debug_cls(class, fmt, ...)
dyndbg: add test_dynamic_debug module
drm: POC drm on dyndbg - map class-names to drm_debug_category's
drm/print: POC drm on dyndbg - use bitmap
drm_print: condense enum drm_debug_category
drm_print: interpose drm_*dbg with forwarding macros
drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
drm_print: refine drm_debug_enabled for jump-label
drm_print: prefer bare printk KERN_DEBUG on generic fn
drm_print: add _ddebug desc to drm_*dbg prototypes
dyndbg: add _DPRINTK_FLAGS_ENABLED
dyndbg: add _DPRINTK_FLAGS_TRACE
dyndbg: add write-events-to-tracefs code
dyndbg: 4 new trace-events: pr_debug, dev_dbg, drm_{,dev}debug
dyndbg/drm: POC add tracebits sysfs-knob
.../admin-guide/dynamic-debug-howto.rst | 12 +
MAINTAINERS | 1 +
drivers/gpu/drm/Kconfig | 12 +
drivers/gpu/drm/Makefile | 2 +
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 +
drivers/gpu/drm/drm_drv.c | 5 +
drivers/gpu/drm/drm_print.c | 69 ++-
drivers/gpu/drm/i915/i915_module.c | 11 +
drivers/gpu/drm/nouveau/nouveau_drm.c | 4 +
include/drm/drm_drv.h | 26 +
include/drm/drm_print.h | 84 ++-
include/linux/dynamic_debug.h | 136 ++++-
include/trace/events/drm.h | 68 +++
include/trace/events/dyndbg.h | 74 +++
lib/Kconfig.debug | 11 +
lib/Makefile | 1 +
lib/dynamic_debug.c | 487 +++++++++++++++---
lib/test_dynamic_debug.c | 172 +++++++
18 files changed, 1049 insertions(+), 129 deletions(-)
create mode 100644 include/trace/events/drm.h
create mode 100644 include/trace/events/dyndbg.h
create mode 100644 lib/test_dynamic_debug.c
--
2.35.1
More information about the linux-arm-kernel
mailing list