[PATCH v2 1/1] arm64: dts: meson: add gpio-fan control to GS-King-X

[Furkan Kardame]

GS-King-X has a single speed GPIO fan which is always-on by default. If
we add controls for the fan and a trip point, the fan stays off most of
the time, reducing background noise from the unit.

Signed-off-by: Furkan Kardame <f.kardame at manjaro.org>
---
 .../boot/dts/amlogic/meson-g12b-gsking-x.dts  | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
index 6c7bfacba..243410913 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
@@ -19,6 +19,15 @@ aliases {
 		rtc0 = &rtc;
 		rtc1 = &vrtc;
 	};
+
+	gpio_fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+		/* Using Dummy Speed */
+		gpio-fan,speed-map = <0 0
+					1 1>;
+		#cooling-cells = <2>;
+		};
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
@@ -131,3 +140,20 @@ &tdmout_a {
 &tohdmitx {
 	status = "okay";
 };
+
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&gpio_fan 1 THERMAL_NO_LIMIT>;
+		};
+	};
+};
-- 
2.35.1