[PATCHv2 4/6] thermal: exynos: fixed the efuse min/max value for exynos5422

[Anand Moon]

As per Exynos5422 user manaul e-Fuse range min~max range is 16~76.
if e-Fuse value is out of this range, then thermal sensor may not
sense thermal data properly.

Cc: Bartlomiej Zolnierkiewicz <bzolnier at gmail.com>
Signed-off-by: Anand Moon <linux.amoon at gmail.com>
---
v1: Fix the commit message
---
 drivers/thermal/samsung/exynos_tmu.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 58ff1b577c47..0faec0f16db6 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -926,12 +926,14 @@ static int exynos_map_dt_data(struct platform_device *pdev)
 		data->gain = 8;
 		data->reference_voltage = 16;
 		data->efuse_value = 55;
-		if (data->soc != SOC_ARCH_EXYNOS5420 &&
-		    data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO)
+		if (data->soc == SOC_ARCH_EXYNOS5420 &&
+		    data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) {
+			data->min_efuse_value = 16;
+			data->max_efuse_value = 76;
+		} else {
 			data->min_efuse_value = 40;
-		else
-			data->min_efuse_value = 0;
-		data->max_efuse_value = 100;
+			data->max_efuse_value = 100;
+		}
 		break;
 	case SOC_ARCH_EXYNOS5433:
 		data->tmu_set_trip_temp = exynos5433_tmu_set_trip_temp;
-- 
2.36.1