[PATCH v2] drivers: cpufreq: sun8i-r40: Add cpufreq support

[qianfan]

在 2022/5/12 4:13, Jernej Škrabec 写道:
> Dne torek, 10. maj 2022 ob 02:36:11 CEST je qianfanguijin at 163.com napisal(a):
>> From: qianfan Zhao <qianfanguijin at 163.com>
>>
>> OPP table value is get from allwinner lichee 3.10 kernel.
>> And completed 'cpu-supply' on sun8i based board.
>>
>> Signed-off-by: qianfan Zhao <qianfanguijin at 163.com>
>> ---
>>   .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts  |  4 ++
>>   arch/arm/boot/dts/sun8i-r40-feta40i.dtsi      |  4 ++
>>   arch/arm/boot/dts/sun8i-r40.dtsi              | 47 +++++++++++++++++++
>>   arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts      |  4 ++
>>   .../boot/dts/sun8i-v40-bananapi-m2-berry.dts  |  4 ++
>>   drivers/cpufreq/cpufreq-dt-platdev.c          |  1 +
> This patch needs to be split in two:
> 1. driver change
> 2. DT changes
>
> And please add change log here for next submission.
Maybe there patch is better? one of driver, one of sun8i-r40.dtsi
and the others is the board's changes.
>
>>   6 files changed, 64 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/
> boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>> index a6a1087a0c9b..4f30018ec4a2 100644
>> --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>> +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
>> @@ -113,6 +113,10 @@ &ahci {
>>   	status = "okay";
>>   };
>>   
>> +&cpu0 {
>> +	cpu-supply = <&reg_dcdc2>;
>> +};
>> +
>>   &de {
>>   	status = "okay";
>>   };
>> diff --git a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/
> sun8i-r40-feta40i.dtsi
>> index 265e0fa57a32..b872b51a346d 100644
>> --- a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
>> +++ b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
>> @@ -6,6 +6,10 @@
>>   
>>   #include "sun8i-r40.dtsi"
>>   
>> +&cpu0 {
>> +	cpu-supply = <&reg_dcdc2>;
>> +};
>> +
>>   &i2c0 {
>>   	status = "okay";
>>   
>> diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-
> r40.dtsi
>> index 291f4784e86c..90de119095fa 100644
>> --- a/arch/arm/boot/dts/sun8i-r40.dtsi
>> +++ b/arch/arm/boot/dts/sun8i-r40.dtsi
>> @@ -54,6 +54,41 @@ / {
>>   	#size-cells = <1>;
>>   	interrupt-parent = <&gic>;
>>   
>> +	cpu0_opp_table: opp_table0 {
>> +		compatible = "operating-points-v2";
>> +		opp-shared;
>> +
>> +		opp-720000000 {
>> +			opp-hz = /bits/ 64 <720000000>;
>> +			opp-microvolt = <1000000 1000000 1300000>;
>> +			clock-latency-ns = <2000000>;
>> +		};
>> +
>> +		opp-912000000 {
>> +			opp-hz = /bits/ 64 <912000000>;
>> +			opp-microvolt = <1100000 1100000 1300000>;
>> +			clock-latency-ns = <2000000>;
>> +		};
>> +
>> +		opp-1008000000 {
>> +			opp-hz = /bits/ 64 <1008000000>;
>> +			opp-microvolt = <1160000 1160000 1300000>;
>> +			clock-latency-ns = <2000000>;
>> +		};
>> +
>> +		opp-1104000000 {
>> +			opp-hz = /bits/ 64 <1104000000>;
>> +			opp-microvolt = <1240000 1240000 1300000>;
>> +			clock-latency-ns = <2000000>;
>> +		};
>> +
>> +		opp-1200000000 {
>> +			opp-hz = /bits/ 64 <1200000000>;
>> +			opp-microvolt = <1300000 1300000 1300000>;
>> +			clock-latency-ns = <2000000>;
>> +		};
>> +	};
>> +
>>   	clocks {
>>   		#address-cells = <1>;
>>   		#size-cells = <1>;
>> @@ -84,24 +119,36 @@ cpu0: cpu at 0 {
>>   			compatible = "arm,cortex-a7";
>>   			device_type = "cpu";
>>   			reg = <0>;
>> +			clocks = <&ccu CLK_CPU>;
>> +			clock-names = "cpu";
>> +			operating-points-v2 = <&cpu0_opp_table>;
>>   		};
>>   
>>   		cpu1: cpu at 1 {
>>   			compatible = "arm,cortex-a7";
>>   			device_type = "cpu";
>>   			reg = <1>;
>> +			clocks = <&ccu CLK_CPU>;
>> +			clock-names = "cpu";
>> +			operating-points-v2 = <&cpu0_opp_table>;
>>   		};
>>   
>>   		cpu2: cpu at 2 {
>>   			compatible = "arm,cortex-a7";
>>   			device_type = "cpu";
>>   			reg = <2>;
>> +			clocks = <&ccu CLK_CPU>;
>> +			clock-names = "cpu";
>> +			operating-points-v2 = <&cpu0_opp_table>;
>>   		};
>>   
>>   		cpu3: cpu at 3 {
>>   			compatible = "arm,cortex-a7";
>>   			device_type = "cpu";
>>   			reg = <3>;
>> +			clocks = <&ccu CLK_CPU>;
>> +			clock-names = "cpu";
>> +			operating-points-v2 = <&cpu0_opp_table>;
>>   		};
>>   	};
>>   
>> diff --git a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/
> sun8i-t3-cqa3t-bv3.dts
>> index 6931aaab2382..0eb1990742ff 100644
>> --- a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
>> +++ b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
>> @@ -88,6 +88,10 @@ &ahci {
>>   	status = "okay";
>>   };
>>   
>> +&cpu0 {
>> +	cpu-supply = <&reg_dcdc2>;
>> +};
>> +
>>   &de {
>>   	status = "okay";
>>   };
>> diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/
> boot/dts/sun8i-v40-bananapi-m2-berry.dts
>> index 47954551f573..fdf8bd12faaa 100644
>> --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
>> +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
>> @@ -107,6 +107,10 @@ &ahci {
>>   	status = "okay";
>>   };
>>   
>> +&cpu0 {
>> +	cpu-supply = <&reg_dcdc2>;
>> +};
>> +
>>   &de {
>>   	status = "okay";
>>   };
>> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-
> dt-platdev.c
>> index ca1d103ec449..971a99219d4d 100644
>> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
>> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
>> @@ -26,6 +26,7 @@ static const struct of_device_id allowlist[] __initconst =
> {
>>   	{ .compatible = "allwinner,sun8i-a23", },
>>   	{ .compatible = "allwinner,sun8i-a83t", },
>>   	{ .compatible = "allwinner,sun8i-h3", },
>> +	{ .compatible = "allwinner,sun8i-r40", },
> Why on allow list? Comment says operatings-point-v2 should be on block list,
> just like H6.
Actually I'm not make sure the difference, seems both of them can work.
Most of allwinner device_id is added in allowlist, so I did this.
>
> Best regards,
> Jernej
>
>>   
>>   	{ .compatible = "apm,xgene-shadowcat", },
>>   
>> -- 
>> 2.25.1
>>
>>