[PATCH v2 1/2] arm64: dts: uDPU: update partition table

[Robert Marko]

On Tue, May 10, 2022 at 3:56 PM Krzysztof Kozlowski
<krzysztof.kozlowski at linaro.org> wrote:
>
> On 22/03/2022 11:58, Robert Marko wrote:
> > Partition currently called "uboot" does not only contain U-boot, but
> > rather it contains TF-A, U-boot and U-boot environment.
> >
> > So, to avoid accidentally deleting the U-boot environment which is
> > located at 0x180000 split the partition.
> >
> > "uboot" is not the correct name as you can't boot these boards with U-boot
> > only, TF-A must be present as well, so rename the "uboot" partition to
> > "firmware".
> >
> > While we are here, describe the NOR node as "spi-flash at 0" instead of
> > "m25p80 at 0" which is the old SPI-NOR driver name.
>
> This patch was applied, but it was never tested with dtbs_check (nor
> rebased on my cleanups). spi-flash is still wrong.

Hi Krzysztof, sorry for that, I did run dtbs_check on it but there is
a whole forest of
warnings about schemas not being matched as most of the bindings are
still plaintext
and I missed this.

I did correct this to flash at 0 in the eDPU series that was sent out today.
Regards,
Robert
>
> Best regards,
> Krzysztof



-- 
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko at sartura.hr
Web: www.sartura.hr