[PATCH V6 0/4] arm64: add i.MX93 support

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

Sorry for sending several versions in short time, just wanna to catch 5.19

V6:
 Per Fabio's comments, drop unused uart2/uart5 pinmux

V5:
 Add R-b from Aisheng
 drop iomuxc status from board dts

V4:
 Add A-b
 In patch 1 to move imx93 behind imx8ulp
 Drop a whitespace in patch 2

V3:
 Add a new patch patch 1 for board binding doc
 Add A-b from Rob
 Fix dtb warnings.

V2:
 Update License

Add i.MX93 dtsi and 11x11 evk board support

The required bindings and drivers has already been in tree.
There arem checkpatch error for the pin header files as other i.MX pin
pin header files.


Peng Fan (4):
  dt-bindings: arm: fsl: add imx93 11x11 evk board
  arm64: dts: freescale: Add i.MX93 dtsi support
  arm64: dts: freescale: add i.MX93 11x11 EVK basic support
  arm64: defconfig: enable i.MX93 clk & pinctrl

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx93-11x11-evk.dts    | 114 ++++
 arch/arm64/boot/dts/freescale/imx93-pinfunc.h | 623 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx93.dtsi      | 334 ++++++++++
 arch/arm64/configs/defconfig                  |   2 +
 6 files changed, 1080 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
 create mode 100755 arch/arm64/boot/dts/freescale/imx93-pinfunc.h
 create mode 100644 arch/arm64/boot/dts/freescale/imx93.dtsi

-- 
2.25.1