[PATCH v1] serial: meson: acquire port->lock in startup()

[Greg Kroah-Hartman]

On Tue, May 10, 2022 at 11:37:23AM +0200, Petr Mladek wrote:
> On Mon 2022-05-09 09:36:40, Neil Armstrong wrote:
> > On 08/05/2022 12:35, John Ogness wrote:
> > > The uart_ops startup() callback is called without interrupts
> > > disabled and without port->lock locked, relatively late during the
> > > boot process (from the call path of console_on_rootfs()). If the
> > > device is a console, it was already previously registered and could
> > > be actively printing messages.
> > > 
> > > Since the startup() callback is reading/writing registers used by
> > > the console write() callback (AML_UART_CONTROL), its access must
> > > be synchronized using the port->lock. Currently it is not.
> > > 
> > > The startup() callback is the only function that explicitly enables
> > > interrupts. Without the synchronization, it is possible that
> > > interrupts become accidentally permanently disabled.
> > > 
> > > CPU0                           CPU1
> > > meson_serial_console_write     meson_uart_startup
> > > --------------------------     ------------------
> > > spin_lock(port->lock)
> > > val = readl(AML_UART_CONTROL)
> > > uart_console_write()
> > >                                 writel(INT_EN, AML_UART_CONTROL)
> > > writel(val, AML_UART_CONTROL)
> > > spin_unlock(port->lock)
> > > 
> > > Add port->lock synchronization to meson_uart_startup() to avoid
> > > racing with meson_serial_console_write().
> > > 
> > > Also add detailed comments to meson_uart_reset() explaining why it
> > > is *not* using port->lock synchronization.
> > > 
> > > Link: https://lore.kernel.org/lkml/2a82eae7-a256-f70c-fd82-4e510750906e@samsung.com
> > > Reported-by: Marek Szyprowski <m.szyprowski at samsung.com>
> > > Signed-off-by: John Ogness <john.ogness at linutronix.de>
> > > Tested-by: Marek Szyprowski <m.szyprowski at samsung.com>
> > > ---
> > >   drivers/tty/serial/meson_uart.c | 13 +++++++++++++
> > >   1 file changed, 13 insertions(+)
> > > 
> > > diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
> > > index 2bf1c57e0981..39021dac09cc 100644
> > > --- a/drivers/tty/serial/meson_uart.c
> > > +++ b/drivers/tty/serial/meson_uart.c
> > > @@ -253,6 +253,14 @@ static const char *meson_uart_type(struct uart_port *port)
> > >   	return (port->type == PORT_MESON) ? "meson_uart" : NULL;
> > >   }
> > > +/*
> > > + * This function is called only from probe() using a temporary io mapping
> > > + * in order to perform a reset before setting up the device. Since the
> > > + * temporarily mapped region was successfully requested, there can be no
> > > + * console on this port at this time. Hence it is not necessary for this
> > > + * function to acquire the port->lock. (Since there is no console on this
> > > + * port at this time, the port->lock is not initialized yet.)
> > > + */
> > >   static void meson_uart_reset(struct uart_port *port)
> > >   {
> > >   	u32 val;
> > > @@ -267,9 +275,12 @@ static void meson_uart_reset(struct uart_port *port)
> > >   static int meson_uart_startup(struct uart_port *port)
> > >   {
> > > +	unsigned long flags;
> > >   	u32 val;
> > >   	int ret = 0;
> > > +	spin_lock_irqsave(&port->lock, flags);
> > > +
> > >   	val = readl(port->membase + AML_UART_CONTROL);
> > >   	val |= AML_UART_CLEAR_ERR;
> > >   	writel(val, port->membase + AML_UART_CONTROL);
> > > @@ -285,6 +296,8 @@ static int meson_uart_startup(struct uart_port *port)
> > >   	val = (AML_UART_RECV_IRQ(1) | AML_UART_XMIT_IRQ(port->fifosize / 2));
> > >   	writel(val, port->membase + AML_UART_MISC);
> > > +	spin_unlock_irqrestore(&port->lock, flags);
> > > +
> > >   	ret = request_irq(port->irq, meson_uart_interrupt, 0,
> > >   			  port->name, port);
> > > 
> > > base-commit: 672c0c5173427e6b3e2a9bbb7be51ceeec78093a
> > 
> > Thanks for fixing this, it may also fix an uart apparent lockup I encountered
> > several time while developing on the platform, but the target was still alive
> > so it matches.
> > 
> > So I'll add:
> > Fixes: ff7693d079e5 ("ARM: meson: serial: add MesonX SoC on-chip uart driver")
> > 
> > and
> > 
> > Acked-by: Neil Armstrong <narmstrong at baylibre.com>
> 
> Neil, may I assume that you are going to queue this fix for 5.19, please?

I can take it, thanks.

greg k-h