[RFC v8 net-next 14/16] net: dsa: ocelot: add external ocelot switch control

Vladimir Oltean vladimir.oltean at nxp.com
Mon May 9 09:27:22 PDT 2022


On Sun, May 08, 2022 at 11:53:11AM -0700, Colin Foster wrote:
> Add control of an external VSC7512 chip by way of the ocelot-mfd interface.
> 
> Currently the four copper phy ports are fully functional. Communication to
> external phys is also functional, but the SGMII / QSGMII interfaces are
> currently non-functional.
> 
> Signed-off-by: Colin Foster <colin.foster at in-advantage.com>
> ---
>  drivers/mfd/ocelot-core.c           |   3 +
>  drivers/net/dsa/ocelot/Kconfig      |  14 ++
>  drivers/net/dsa/ocelot/Makefile     |   5 +
>  drivers/net/dsa/ocelot/ocelot_ext.c | 368 ++++++++++++++++++++++++++++
>  include/soc/mscc/ocelot.h           |   2 +
>  5 files changed, 392 insertions(+)
>  create mode 100644 drivers/net/dsa/ocelot/ocelot_ext.c
> 
> diff --git a/drivers/mfd/ocelot-core.c b/drivers/mfd/ocelot-core.c
> index 117028f7d845..c582b409a9f3 100644
> --- a/drivers/mfd/ocelot-core.c
> +++ b/drivers/mfd/ocelot-core.c
> @@ -112,6 +112,9 @@ static const struct mfd_cell vsc7512_devs[] = {
>  		.of_compatible = "mscc,ocelot-miim",
>  		.num_resources = ARRAY_SIZE(vsc7512_miim1_resources),
>  		.resources = vsc7512_miim1_resources,
> +	}, {
> +		.name = "ocelot-ext-switch",
> +		.of_compatible = "mscc,vsc7512-ext-switch",
>  	},
>  };
>  
> diff --git a/drivers/net/dsa/ocelot/Kconfig b/drivers/net/dsa/ocelot/Kconfig
> index 220b0b027b55..f40b2c7171ad 100644
> --- a/drivers/net/dsa/ocelot/Kconfig
> +++ b/drivers/net/dsa/ocelot/Kconfig
> @@ -1,4 +1,18 @@
>  # SPDX-License-Identifier: GPL-2.0-only
> +config NET_DSA_MSCC_OCELOT_EXT
> +	tristate "Ocelot External Ethernet switch support"
> +	depends on NET_DSA && SPI
> +	depends on NET_VENDOR_MICROSEMI
> +	select MDIO_MSCC_MIIM
> +	select MFD_OCELOT_CORE
> +	select MSCC_OCELOT_SWITCH_LIB
> +	select NET_DSA_TAG_OCELOT_8021Q
> +	select NET_DSA_TAG_OCELOT
> +	help
> +	  This driver supports the VSC7511, VSC7512, VSC7513 and VSC7514 chips
> +	  when controlled through SPI. It can be used with the Microsemi dev
> +	  boards and an external CPU or custom hardware.
> +
>  config NET_DSA_MSCC_FELIX
>  	tristate "Ocelot / Felix Ethernet switch support"
>  	depends on NET_DSA && PCI
> diff --git a/drivers/net/dsa/ocelot/Makefile b/drivers/net/dsa/ocelot/Makefile
> index f6dd131e7491..d7f3f5a4461c 100644
> --- a/drivers/net/dsa/ocelot/Makefile
> +++ b/drivers/net/dsa/ocelot/Makefile
> @@ -1,11 +1,16 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  obj-$(CONFIG_NET_DSA_MSCC_FELIX) += mscc_felix.o
> +obj-$(CONFIG_NET_DSA_MSCC_OCELOT_EXT) += mscc_ocelot_ext.o
>  obj-$(CONFIG_NET_DSA_MSCC_SEVILLE) += mscc_seville.o
>  
>  mscc_felix-objs := \
>  	felix.o \
>  	felix_vsc9959.o
>  
> +mscc_ocelot_ext-objs := \
> +	felix.o \
> +	ocelot_ext.o
> +
>  mscc_seville-objs := \
>  	felix.o \
>  	seville_vsc9953.o
> diff --git a/drivers/net/dsa/ocelot/ocelot_ext.c b/drivers/net/dsa/ocelot/ocelot_ext.c
> new file mode 100644
> index 000000000000..ba924f6b8d12
> --- /dev/null
> +++ b/drivers/net/dsa/ocelot/ocelot_ext.c
> @@ -0,0 +1,368 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2021-2022 Innovative Advantage Inc.
> + */
> +
> +#include <asm/byteorder.h>
> +#include <linux/iopoll.h>
> +#include <linux/kconfig.h>
> +#include <linux/phylink.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <soc/mscc/ocelot_ana.h>
> +#include <soc/mscc/ocelot_dev.h>
> +#include <soc/mscc/ocelot_qsys.h>
> +#include <soc/mscc/ocelot_vcap.h>
> +#include <soc/mscc/ocelot_ptp.h>
> +#include <soc/mscc/ocelot_sys.h>
> +#include <soc/mscc/ocelot.h>
> +#include <soc/mscc/vsc7514_regs.h>
> +#include "felix.h"
> +
> +#define VSC7512_NUM_PORTS		11
> +
> +static const u32 vsc7512_port_modes[VSC7512_NUM_PORTS] = {
> +	OCELOT_PORT_MODE_INTERNAL,
> +	OCELOT_PORT_MODE_INTERNAL,
> +	OCELOT_PORT_MODE_INTERNAL,
> +	OCELOT_PORT_MODE_INTERNAL,
> +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> +	OCELOT_PORT_MODE_SGMII,
> +	OCELOT_PORT_MODE_SGMII | OCELOT_PORT_MODE_QSGMII,
> +};
> +
> +static const u32 vsc7512_gcb_regmap[] = {
> +	REG(GCB_SOFT_RST,			0x0008),
> +	REG(GCB_MIIM_MII_STATUS,		0x009c),
> +	REG(GCB_PHY_PHY_CFG,			0x00f0),
> +	REG(GCB_PHY_PHY_STAT,			0x00f4),
> +};
> +
> +static const u32 *vsc7512_regmap[TARGET_MAX] = {
> +	[ANA] = vsc7514_ana_regmap,
> +	[QS] = vsc7514_qs_regmap,
> +	[QSYS] = vsc7514_qsys_regmap,
> +	[REW] = vsc7514_rew_regmap,
> +	[SYS] = vsc7514_sys_regmap,
> +	[S0] = vsc7514_vcap_regmap,
> +	[S1] = vsc7514_vcap_regmap,
> +	[S2] = vsc7514_vcap_regmap,
> +	[PTP] = vsc7514_ptp_regmap,
> +	[GCB] = vsc7512_gcb_regmap,
> +	[DEV_GMII] = vsc7514_dev_gmii_regmap,
> +};
> +
> +static void ocelot_ext_reset_phys(struct ocelot *ocelot)
> +{
> +	ocelot_write(ocelot, 0, GCB_PHY_PHY_CFG);
> +	ocelot_write(ocelot, 0x1ff, GCB_PHY_PHY_CFG);
> +	mdelay(500);
> +}
> +
> +static int ocelot_ext_reset(struct ocelot *ocelot)
> +{
> +	int retries = 100;
> +	int err, val;
> +
> +	ocelot_ext_reset_phys(ocelot);
> +
> +	/* Initialize chip memories */
> +	err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
> +	if (err)
> +		return err;
> +
> +	err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], 1);
> +	if (err)
> +		return err;
> +
> +	/* MEM_INIT is a self-clearing bit. Wait for it to be clear (should be
> +	 * 100us) before enabling the switch core
> +	 */
> +	do {
> +		msleep(1);
> +		err = regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT],
> +					&val);
> +		if (err)
> +			return err;
> +	} while (val && --retries);

Can you use readx_poll_timeout() here?

> +
> +	if (!retries)
> +		return -ETIMEDOUT;
> +
> +	return regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
> +}
> +
> +static const struct ocelot_ops ocelot_ext_ops = {
> +	.reset		= ocelot_ext_reset,
> +	.wm_enc		= ocelot_wm_enc,
> +	.wm_dec		= ocelot_wm_dec,
> +	.wm_stat	= ocelot_wm_stat,
> +	.port_to_netdev	= felix_port_to_netdev,
> +	.netdev_to_port	= felix_netdev_to_port,
> +};
> +
> +static const struct resource vsc7512_target_io_res[TARGET_MAX] = {
> +	[ANA] = {
> +		.start	= 0x71880000,
> +		.end	= 0x7188ffff,
> +		.name	= "ana",
> +	},
> +	[QS] = {
> +		.start	= 0x71080000,
> +		.end	= 0x710800ff,
> +		.name	= "qs",
> +	},
> +	[QSYS] = {
> +		.start	= 0x71800000,
> +		.end	= 0x719fffff,
> +		.name	= "qsys",
> +	},
> +	[REW] = {
> +		.start	= 0x71030000,
> +		.end	= 0x7103ffff,
> +		.name	= "rew",
> +	},
> +	[SYS] = {
> +		.start	= 0x71010000,
> +		.end	= 0x7101ffff,
> +		.name	= "sys",
> +	},
> +	[S0] = {
> +		.start	= 0x71040000,
> +		.end	= 0x710403ff,
> +		.name	= "s0",
> +	},
> +	[S1] = {
> +		.start	= 0x71050000,
> +		.end	= 0x710503ff,
> +		.name	= "s1",
> +	},
> +	[S2] = {
> +		.start	= 0x71060000,
> +		.end	= 0x710603ff,
> +		.name	= "s2",
> +	},
> +	[GCB] =	{
> +		.start	= 0x71070000,
> +		.end	= 0x7107022b,
> +		.name	= "devcpu_gcb",
> +	},
> +};
> +
> +static const struct resource vsc7512_port_io_res[] = {
> +	{
> +		.start	= 0x711e0000,
> +		.end	= 0x711effff,
> +		.name	= "port0",
> +	},
> +	{
> +		.start	= 0x711f0000,
> +		.end	= 0x711fffff,
> +		.name	= "port1",
> +	},
> +	{
> +		.start	= 0x71200000,
> +		.end	= 0x7120ffff,
> +		.name	= "port2",
> +	},
> +	{
> +		.start	= 0x71210000,
> +		.end	= 0x7121ffff,
> +		.name	= "port3",
> +	},
> +	{
> +		.start	= 0x71220000,
> +		.end	= 0x7122ffff,
> +		.name	= "port4",
> +	},
> +	{
> +		.start	= 0x71230000,
> +		.end	= 0x7123ffff,
> +		.name	= "port5",
> +	},
> +	{
> +		.start	= 0x71240000,
> +		.end	= 0x7124ffff,
> +		.name	= "port6",
> +	},
> +	{
> +		.start	= 0x71250000,
> +		.end	= 0x7125ffff,
> +		.name	= "port7",
> +	},
> +	{
> +		.start	= 0x71260000,
> +		.end	= 0x7126ffff,
> +		.name	= "port8",
> +	},
> +	{
> +		.start	= 0x71270000,
> +		.end	= 0x7127ffff,
> +		.name	= "port9",
> +	},
> +	{
> +		.start	= 0x71280000,
> +		.end	= 0x7128ffff,
> +		.name	= "port10",
> +	},
> +};
> +
> +static void ocelot_ext_phylink_validate(struct ocelot *ocelot, int port,
> +					unsigned long *supported,
> +					struct phylink_link_state *state)
> +{
> +	struct ocelot_port *ocelot_port = ocelot->ports[port];
> +
> +	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
> +
> +	if (state->interface != PHY_INTERFACE_MODE_NA &&

This check is no longer necessary, please look again at the other
phylink validation functions.

> +	    state->interface != ocelot_port->phy_mode) {

Also, I don't see what is the point of providing one phylink validation
method only to replace it later in the patchset with the generic one.
Please squash "net: dsa: ocelot: utilize phylink_generic_validate" into
this.

> +		bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
> +		return;
> +	}
> +
> +	phylink_set_port_modes(mask);
> +
> +	phylink_set(mask, Pause);
> +	phylink_set(mask, Autoneg);
> +	phylink_set(mask, Asym_Pause);
> +	phylink_set(mask, 10baseT_Half);
> +	phylink_set(mask, 10baseT_Full);
> +	phylink_set(mask, 100baseT_Half);
> +	phylink_set(mask, 100baseT_Full);
> +	phylink_set(mask, 1000baseT_Half);
> +	phylink_set(mask, 1000baseT_Full);
> +
> +	bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
> +	bitmap_and(state->advertising, state->advertising, mask,
> +		   __ETHTOOL_LINK_MODE_MASK_NBITS);
> +}
> +
> +static struct regmap *ocelot_ext_regmap_init(struct ocelot *ocelot,
> +					     struct resource *res)
> +{
> +	return ocelot_init_regmap_from_resource(ocelot->dev, res);
> +}
> +
> +static const struct felix_info vsc7512_info = {
> +	.target_io_res			= vsc7512_target_io_res,
> +	.port_io_res			= vsc7512_port_io_res,
> +	.regfields			= vsc7514_regfields,
> +	.map				= vsc7512_regmap,
> +	.ops				= &ocelot_ext_ops,
> +	.stats_layout			= vsc7514_stats_layout,
> +	.vcap				= vsc7514_vcap_props,
> +	.num_mact_rows			= 1024,
> +	.num_ports			= VSC7512_NUM_PORTS,
> +	.num_tx_queues			= OCELOT_NUM_TC,
> +	.phylink_validate		= ocelot_ext_phylink_validate,
> +	.port_modes			= vsc7512_port_modes,
> +	.init_regmap			= ocelot_ext_regmap_init,
> +};
> +
> +static int ocelot_ext_probe(struct platform_device *pdev)
> +{
> +	struct dsa_switch *ds;
> +	struct ocelot *ocelot;
> +	struct felix *felix;
> +	struct device *dev;
> +	int err;
> +
> +	dev = &pdev->dev;

I would prefer if this assignment was part of the variable declaration.

> +
> +	felix = kzalloc(sizeof(*felix), GFP_KERNEL);
> +	if (!felix)
> +		return -ENOMEM;
> +
> +	dev_set_drvdata(dev, felix);
> +
> +	ocelot = &felix->ocelot;
> +	ocelot->dev = dev;
> +
> +	ocelot->num_flooding_pgids = 1;
> +
> +	felix->info = &vsc7512_info;
> +
> +	ds = kzalloc(sizeof(*ds), GFP_KERNEL);
> +	if (!ds) {
> +		err = -ENOMEM;
> +		dev_err(dev, "Failed to allocate DSA switch\n");
> +		goto err_free_felix;
> +	}
> +
> +	ds->dev = dev;
> +	ds->num_ports = felix->info->num_ports;
> +	ds->num_tx_queues = felix->info->num_tx_queues;
> +
> +	ds->ops = &felix_switch_ops;
> +	ds->priv = ocelot;
> +	felix->ds = ds;
> +	felix->tag_proto = DSA_TAG_PROTO_OCELOT;
> +
> +	err = dsa_register_switch(ds);
> +	if (err) {
> +		dev_err(dev, "Failed to register DSA switch: %d\n", err);

dev_err_probe please (look at the other drivers)

> +		goto err_free_ds;
> +	}
> +
> +	return 0;
> +
> +err_free_ds:
> +	kfree(ds);
> +err_free_felix:
> +	kfree(felix);
> +	return err;
> +}
> +
> +static int ocelot_ext_remove(struct platform_device *pdev)
> +{
> +	struct felix *felix = dev_get_drvdata(&pdev->dev);
> +
> +	if (!felix)
> +		return 0;
> +
> +	dsa_unregister_switch(felix->ds);
> +
> +	kfree(felix->ds);
> +	kfree(felix);
> +
> +	dev_set_drvdata(&pdev->dev, NULL);
> +
> +	return 0;
> +}
> +
> +static void ocelot_ext_shutdown(struct platform_device *pdev)
> +{
> +	struct felix *felix = dev_get_drvdata(&pdev->dev);
> +
> +	if (!felix)
> +		return;
> +
> +	dsa_switch_shutdown(felix->ds);
> +
> +	dev_set_drvdata(&pdev->dev, NULL);
> +}
> +
> +const struct of_device_id ocelot_ext_switch_of_match[] = {

static

> +	{ .compatible = "mscc,vsc7512-ext-switch" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, ocelot_ext_switch_of_match);
> +
> +static struct platform_driver ocelot_ext_switch_driver = {
> +	.driver = {
> +		.name = "ocelot-ext-switch",
> +		.of_match_table = of_match_ptr(ocelot_ext_switch_of_match),
> +	},
> +	.probe = ocelot_ext_probe,
> +	.remove = ocelot_ext_remove,
> +	.shutdown = ocelot_ext_shutdown,
> +};
> +module_platform_driver(ocelot_ext_switch_driver);
> +
> +MODULE_DESCRIPTION("External Ocelot Switch driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
> index 61888453f913..ade84e86741e 100644
> --- a/include/soc/mscc/ocelot.h
> +++ b/include/soc/mscc/ocelot.h
> @@ -402,6 +402,8 @@ enum ocelot_reg {
>  	GCB_MIIM_MII_STATUS,
>  	GCB_MIIM_MII_CMD,
>  	GCB_MIIM_MII_DATA,
> +	GCB_PHY_PHY_CFG,
> +	GCB_PHY_PHY_STAT,
>  	DEV_CLOCK_CFG = DEV_GMII << TARGET_OFFSET,
>  	DEV_PORT_MISC,
>  	DEV_EVENTS,
> -- 
> 2.25.1
>


More information about the linux-arm-kernel mailing list