[PATCH 3/6] dt-bindings: net: Add documentation for phy-supply

[Corentin Labbe]

Add entries for the 2 new phy-supply and phy-io-supply.

Signed-off-by: Corentin Labbe <clabbe at baylibre.com>
---
 .../devicetree/bindings/net/ethernet-phy.yaml          | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index ed1415a4381f..2a6b45ddf010 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -153,6 +153,16 @@ properties:
       used. The absence of this property indicates the muxers
       should be configured so that the external PHY is used.
 
+  phy-supply:
+    description:
+      Phandle to a regulator that provides power to the PHY. This
+      regulator will be managed during the PHY power on/off sequence.
+
+  phy-io-supply:
+    description:
+      Phandle to a regulator that provides power to the PHY. This
+      regulator will be managed during the PHY power on/off sequence.
+
   resets:
     maxItems: 1
 
-- 
2.35.1