[PATCH] arm64: dts: allwinner: define USB3 Ethernet on NanoPi R1S H5

[Chukun Pan]

> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
> > @@ -21,7 +21,8 @@ / {
> >  
> >  	aliases {
> >  		ethernet0 = &emac;
> > -		ethernet1 = &rtl8189etv;
> > +		ethernet1 = &rtl8153;
> > +		ethernet2 = &rtl8189etv;

> Additionally, it's not a good idea to change order of ethernet nodes. It can 
> affect mac address assigning procedure in bootloader.

There is no eth1addr in uboot, so this doesn't affect the mac address.
The network order in the kernel is eth0(emac) / eth1(rtl8153) / wlan0,
so I think it would be better to change it this way.

Thanks,
Chukun