[PATCH v2 10/11] dt-bindings: display: convert Arm Mali-DP to DT schema

[Rob Herring]

On Fri, 06 May 2022 15:05:32 +0100, Andre Przywara wrote:
> The Arm Mali Display Processor (DP) 5xx/6xx is a series of IP that scans
> out a framebuffer and hands the pixels over to a digital signal encoder.
> It supports multiple layers, scaling and rotation.
> 
> Convert the existing DT binding to DT schema.
> 
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
>  .../bindings/display/arm,malidp.txt           |  68 ----------
>  .../bindings/display/arm,malidp.yaml          | 116 ++++++++++++++++++
>  2 files changed, 116 insertions(+), 68 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/arm,malidp.txt
>  create mode 100644 Documentation/devicetree/bindings/display/arm,malidp.yaml
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


display at f080000: 'arm,malidp-arqos-value' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb