[PATCH v7 7/8] ARM: dts: Introduce HPE GXP Device tree
nick.hawkins at hpe.com
nick.hawkins at hpe.com
Fri May 6 12:13:38 PDT 2022
From: Nick Hawkins <nick.hawkins at hpe.com>
The HPE SoC is new to linux. A basic device tree layout with minimum
required for linux to boot including a timer and watchdog support has
been created.
The dts file is empty at this point but will be updated in subsequent
updates as board specific features are enabled.
Signed-off-by: Nick Hawkins <nick.hawkins at hpe.com>
---
v7:
* Changed cache register area length from 0xFFC to 0x1000
* Added space between "," in compatible list for the
hpe-bmc-dl360gen10.dts
* Added aliases, chosen, and memory to hpe-bmc-dl360gen10.dts
* Removed memory from hpe-gxp.dtsi
v6:
* Added cache-controller to CPU
* Removed hpe,gxp-wdt and removed simple-mfd from hpe,gxp-timer
* Added space after ',' in compatible lists in the dtsi containing more
than one item
* Switched clock name iopclk to iop based on feedback from
hpe,gxp-timer.yaml
* Added clock labels clock-0 and clock-1
* Added dma-ranges to ahb
* Changed subject to better match ones in the log
* Changed description to fit 75 characters per line
v5:
* Fixed commit message to show previous changes
* Fixed typo ehci -> echi
v4:
* Removed hpe,gxp-cpu-init as it was no longer necessary
* Removed bootargs as requested
* Removed empty ahb node
* Moved reg after compatible, everywhere
* Removed osc and memclk
* Removed syscon at c00000f8 as it was not necessary for boot
* Fixed Alphabetical issue in dts/Makefile
* Added specific board binding for dl360gen10
* Removed empty node
* Added Accurate Clock Architecture
* Fixed generic-echi and generic-ochi issues
* Removed i2cg
v3:
* Fixed issues with warnings
* Used proper patchset format
v2:
* Reduced size of dtsi to essential components
* Followed the proper format for having a dtsi and
dts
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/hpe-bmc-dl360gen10.dts | 26 +++++
arch/arm/boot/dts/hpe-gxp.dtsi | 127 +++++++++++++++++++++++
3 files changed, 155 insertions(+)
create mode 100644 arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
create mode 100644 arch/arm/boot/dts/hpe-gxp.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7c16f8a2b738..293717719c70 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -255,6 +255,8 @@ dtb-$(CONFIG_ARCH_HISI) += \
hi3519-demb.dtb
dtb-$(CONFIG_ARCH_HIX5HD2) += \
hisi-x5hd2-dkb.dtb
+dtb-$(CONFIG_ARCH_HPE_GXP) += \
+ hpe-bmc-dl360gen10.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += \
integratorap.dtb \
integratorap-im-pd1.dtb \
diff --git a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
new file mode 100644
index 000000000000..3a7382ce40ef
--- /dev/null
+++ b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE DL360Gen10
+ */
+
+/include/ "hpe-gxp.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "hpe,gxp-dl360gen10", "hpe,gxp";
+ model = "Hewlett Packard Enterprise ProLiant dl360 Gen10";
+
+ aliases {
+ serial0 = &uartc;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x20000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe-gxp.dtsi
new file mode 100644
index 000000000000..cf735b3c4f35
--- /dev/null
+++ b/arch/arm/boot/dts/hpe-gxp.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE GXP
+ */
+
+/dts-v1/;
+/ {
+ model = "Hewlett Packard Enterprise GXP BMC";
+ compatible = "hpe,gxp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ device_type = "cpu";
+ next-level-cache = <&L2>;
+ };
+ };
+
+ clocks {
+ pll: clock-0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1600000000>;
+ };
+
+ iopclk: clock-1 {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clocks = <&pll>;
+ };
+ };
+
+ axi {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ dma-ranges;
+
+ L2: cache-controller at b0040000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xb0040000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ ahb at c0000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc0000000 0x30000000>;
+ dma-ranges;
+
+ vic0: interrupt-controller at eff0000 {
+ compatible = "arm,pl192-vic";
+ reg = <0xeff0000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ vic1: interrupt-controller at 80f00000 {
+ compatible = "arm,pl192-vic";
+ reg = <0x80f00000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ uarta: serial at e0 {
+ compatible = "ns16550a";
+ reg = <0xe0 0x8>;
+ interrupts = <17>;
+ interrupt-parent = <&vic0>;
+ clock-frequency = <1846153>;
+ reg-shift = <0>;
+ };
+
+ uartb: serial at e8 {
+ compatible = "ns16550a";
+ reg = <0xe8 0x8>;
+ interrupts = <18>;
+ interrupt-parent = <&vic0>;
+ clock-frequency = <1846153>;
+ reg-shift = <0>;
+ };
+
+ uartc: serial at f0 {
+ compatible = "ns16550a";
+ reg = <0xf0 0x8>;
+ interrupts = <19>;
+ interrupt-parent = <&vic0>;
+ clock-frequency = <1846153>;
+ reg-shift = <0>;
+ };
+
+ usb0: usb at efe0000 {
+ compatible = "hpe,gxp-ehci", "generic-ehci";
+ reg = <0xefe0000 0x100>;
+ interrupts = <7>;
+ interrupt-parent = <&vic0>;
+ };
+
+ st: timer at 80 {
+ compatible = "hpe,gxp-timer";
+ reg = <0x80 0x16>;
+ interrupts = <0>;
+ interrupt-parent = <&vic0>;
+ clocks = <&iopclk>;
+ clock-names = "iop";
+ };
+
+ usb1: usb at efe0100 {
+ compatible = "hpe,gxp-ohci", "generic-ohci";
+ reg = <0xefe0100 0x110>;
+ interrupts = <6>;
+ interrupt-parent = <&vic0>;
+ };
+ };
+ };
+};
--
2.17.1
More information about the linux-arm-kernel
mailing list