[PATCH v0.5 9/9] arm64: dts: imx8mp-evk: enable HDMI

Lucas Stach l.stach at pengutronix.de
Fri May 6 11:10:34 PDT 2022


Enable the DT nodes for HDMI TX and PHY and add the pinctrl for the few
involved pins that are configurable.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 4c3ac4214a2c..fdf851865ba9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -197,6 +197,16 @@ ethphy1: ethernet-phy at 1 {
 	};
 };
 
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -465,6 +475,15 @@ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x19
 		>;
 	};
 
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x19
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x19
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
-- 
2.30.2




More information about the linux-arm-kernel mailing list