[PATCH v0.5 2/9] drm/imx: add bridge wrapper driver for i.MX8MP DWC HDMI
Lucas Stach
l.stach at pengutronix.de
Fri May 6 11:10:27 PDT 2022
Add a simple wrapper driver for the DWC HDMI bridge driver that
implements the few bits that are necessary to abstract the i.MX8MP
SoC integration.
Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
drivers/gpu/drm/imx/Kconfig | 1 +
drivers/gpu/drm/imx/Makefile | 2 +
drivers/gpu/drm/imx/bridge/Kconfig | 10 ++
drivers/gpu/drm/imx/bridge/Makefile | 3 +
drivers/gpu/drm/imx/bridge/imx-hdmi.c | 141 ++++++++++++++++++++++++++
5 files changed, 157 insertions(+)
create mode 100644 drivers/gpu/drm/imx/bridge/Kconfig
create mode 100644 drivers/gpu/drm/imx/bridge/Makefile
create mode 100644 drivers/gpu/drm/imx/bridge/imx-hdmi.c
diff --git a/drivers/gpu/drm/imx/Kconfig b/drivers/gpu/drm/imx/Kconfig
index bb9738c7c825..88b054c095c6 100644
--- a/drivers/gpu/drm/imx/Kconfig
+++ b/drivers/gpu/drm/imx/Kconfig
@@ -42,3 +42,4 @@ config DRM_IMX_HDMI
Choose this if you want to use HDMI on i.MX6.
source "drivers/gpu/drm/imx/dcss/Kconfig"
+source "drivers/gpu/drm/imx/bridge/Kconfig"
diff --git a/drivers/gpu/drm/imx/Makefile b/drivers/gpu/drm/imx/Makefile
index b644deffe948..861403d11af6 100644
--- a/drivers/gpu/drm/imx/Makefile
+++ b/drivers/gpu/drm/imx/Makefile
@@ -10,3 +10,5 @@ obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o
obj-$(CONFIG_DRM_IMX_HDMI) += dw_hdmi-imx.o
obj-$(CONFIG_DRM_IMX_DCSS) += dcss/
+
+obj-y += bridge/
diff --git a/drivers/gpu/drm/imx/bridge/Kconfig b/drivers/gpu/drm/imx/bridge/Kconfig
new file mode 100644
index 000000000000..d63a09ca63dd
--- /dev/null
+++ b/drivers/gpu/drm/imx/bridge/Kconfig
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config DRM_IMX_DW_HDMI_BRIDGE
+ tristate "i.MX8MP HDMI bridge support"
+ depends on (ARCH_MXC && ARM64) || COMPILE_TEST
+ depends on DRM && OF
+ select DRM_DW_HDMI
+ help
+ Enable support for the internal HDMI encoder on i.MX8MP SoC
+
diff --git a/drivers/gpu/drm/imx/bridge/Makefile b/drivers/gpu/drm/imx/bridge/Makefile
new file mode 100644
index 000000000000..1cfe9623c0d8
--- /dev/null
+++ b/drivers/gpu/drm/imx/bridge/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_DRM_IMX_DW_HDMI_BRIDGE) += imx-hdmi.o
diff --git a/drivers/gpu/drm/imx/bridge/imx-hdmi.c b/drivers/gpu/drm/imx/bridge/imx-hdmi.c
new file mode 100644
index 000000000000..66089bc690c8
--- /dev/null
+++ b/drivers/gpu/drm/imx/bridge/imx-hdmi.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright (C) 2022 Pengutronix, Lucas Stach <kernel at pengutronix.de>
+ */
+
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_modes.h>
+#include <linux/clk.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+struct imx_hdmi {
+ struct dw_hdmi_plat_data plat_data;
+ struct dw_hdmi *dw_hdmi;
+ struct clk *pixclk;
+ struct clk *fdcc;
+};
+
+static enum drm_mode_status
+imx8mp_hdmi_mode_valid(struct dw_hdmi *dw_hdmi, void *data,
+ const struct drm_display_info *info,
+ const struct drm_display_mode *mode)
+{
+ struct imx_hdmi *hdmi = (struct imx_hdmi *)data;
+
+ if (mode->clock < 13500)
+ return MODE_CLOCK_LOW;
+
+ if (mode->clock > 297000)
+ return MODE_CLOCK_HIGH;
+
+ if (clk_round_rate(hdmi->pixclk, mode->clock * 1000) !=
+ mode->clock * 1000)
+ return MODE_CLOCK_RANGE;
+
+ /* We don't support double-clocked and Interlaced modes */
+ if ((mode->flags & DRM_MODE_FLAG_DBLCLK) ||
+ (mode->flags & DRM_MODE_FLAG_INTERLACE))
+ return MODE_BAD;
+
+ return MODE_OK;
+}
+
+static int imx8mp_hdmi_phy_init(struct dw_hdmi *dw_hdmi, void *data,
+ const struct drm_display_info *display,
+ const struct drm_display_mode *mode)
+{
+ return 0;
+}
+
+static void imx8mp_hdmi_phy_disable(struct dw_hdmi *dw_hdmi, void *data)
+{
+}
+
+static const struct dw_hdmi_phy_ops imx8mp_hdmi_phy_ops = {
+ .init = imx8mp_hdmi_phy_init,
+ .disable = imx8mp_hdmi_phy_disable,
+ .read_hpd = dw_hdmi_phy_read_hpd,
+ .update_hpd = dw_hdmi_phy_update_hpd,
+ .setup_hpd = dw_hdmi_phy_setup_hpd,
+};
+
+static int imx_dw_hdmi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct dw_hdmi_plat_data *plat_data;
+ struct imx_hdmi *hdmi;
+ int ret;
+
+ hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
+ if (!hdmi)
+ return -ENOMEM;
+
+ plat_data = &hdmi->plat_data;
+
+ hdmi->pixclk = devm_clk_get(dev, "pix");
+ if (IS_ERR(hdmi->pixclk))
+ return dev_err_probe(dev, PTR_ERR(hdmi->pixclk),
+ "Unable to get pixel clock\n");
+
+ hdmi->fdcc = devm_clk_get(dev, "fdcc");
+ if (IS_ERR(hdmi->fdcc))
+ return dev_err_probe(dev, PTR_ERR(hdmi->fdcc),
+ "Unable to get FDCC clock\n");
+
+ ret = clk_prepare_enable(hdmi->fdcc);
+ if (ret)
+ return dev_err_probe(dev, ret, "Unable to enable FDCC clock\n");
+
+ plat_data->mode_valid = imx8mp_hdmi_mode_valid;
+ plat_data->phy_ops = &imx8mp_hdmi_phy_ops;
+ plat_data->phy_name = "SAMSUNG HDMI TX PHY";
+ plat_data->priv_data = hdmi;
+
+ hdmi->dw_hdmi = dw_hdmi_probe(pdev, plat_data);
+ if (IS_ERR(hdmi->dw_hdmi))
+ return PTR_ERR(hdmi->dw_hdmi);
+
+ /*
+ * Just release PHY core from reset, all other power management is done
+ * by the PHY driver.
+ */
+ dw_hdmi_phy_gen1_reset(hdmi->dw_hdmi);
+
+ platform_set_drvdata(pdev, hdmi);
+
+ return 0;
+}
+
+static int imx_dw_hdmi_remove(struct platform_device *pdev)
+{
+ struct imx_hdmi *hdmi = platform_get_drvdata(pdev);
+
+ dw_hdmi_remove(hdmi->dw_hdmi);
+
+ clk_disable_unprepare(hdmi->fdcc);
+
+ return 0;
+}
+
+static const struct of_device_id imx_dw_hdmi_of_table[] = {
+ { .compatible = "fsl,imx8mp-hdmi" },
+ { /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx_dw_hdmi_of_table);
+
+static struct platform_driver im_dw_hdmi_platform_driver = {
+ .probe = imx_dw_hdmi_probe,
+ .remove = imx_dw_hdmi_remove,
+ .driver = {
+ .name = "imx-dw-hdmi",
+ .of_match_table = imx_dw_hdmi_of_table,
+ },
+};
+
+module_platform_driver(im_dw_hdmi_platform_driver);
+
+MODULE_DESCRIPTION("i.MX8M HDMI encoder driver");
+MODULE_LICENSE("GPL");
--
2.30.2
More information about the linux-arm-kernel
mailing list