[PATCH v2 00/14] ARM: dts: imx6ull-colibri: device tree improvements

[Marcel Ziswiler]

Hi Shawn

On Thu, 2022-05-05 at 10:47 +0800, Shawn Guo wrote:

[snip]

> The dts series doesn't apply to my branch.
> 
> Applying: ARM: dts: imx6ull-colibri: use pull-down for adc pins
> Applying: ARM: dts: imx6ull-colibri: change touch i2c parameters
> Applying: ARM: dts: imx6ull-colibri: add phy-supply to fec
> Applying: ARM: dts: imx6ull-colibri: add touchscreen device nodes
> Applying: ARM: dts: imx6ull-colibri: update usdhc1 pixmux and signaling
> error: patch failed: arch/arm/boot/dts/imx6ull-colibri.dtsi:35
> error: arch/arm/boot/dts/imx6ull-colibri.dtsi: patch does not apply
> Patch failed at 0005 ARM: dts: imx6ull-colibri: update usdhc1 pixmux and signaling
> hint: Use 'git am --show-current-patch' to see the failed patch
> When you have resolved this problem, run "git am --continue".
> If you prefer to skip this patch, run "git am --skip" instead.
> To restore the original branch and stop patching, run "git am --abort".
> 
> Applying: ARM: dts: imx6ull-colibri: update device trees to support overlays
> Applying: ARM: dts: imx6ull-colibri: add gpio-line-names
> Applying: ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards
> Applying: ARM: dts: imx6ull-colibri: add support for toradex aster carrier boards
> Applying: ARM: dts: imx6ull-colibri: fix nand bch geometry
> Applying: ARM: dts: imx6ull-colibri: add/update some comments
> error: patch failed: arch/arm/boot/dts/imx6ull-colibri.dtsi:251
> error: arch/arm/boot/dts/imx6ull-colibri.dtsi: patch does not apply
> Patch failed at 0011 ARM: dts: imx6ull-colibri: add/update some comments
> hint: Use 'git am --show-current-patch' to see the failed patch
> When you have resolved this problem, run "git am --continue".
> If you prefer to skip this patch, run "git am --skip" instead.
> To restore the original branch and stop patching, run "git am --abort".
> 
> Applying: ARM: dts: imx6ull-colibri: move gpio-keys node to som dtsi
> Applying: ARM: dts: imx6ull-colibri: improve pinctrl node names
> error: patch failed: arch/arm/boot/dts/imx6ull-colibri.dtsi:292
> error: arch/arm/boot/dts/imx6ull-colibri.dtsi: patch does not apply
> Patch failed at 0013 ARM: dts: imx6ull-colibri: improve pinctrl node names
> hint: Use 'git am --show-current-patch' to see the failed patch
> When you have resolved this problem, run "git am --continue".
> If you prefer to skip this patch, run "git am --skip" instead.
> 
> Shawn

I just now sent a v3 re-based on your imx/dt. I hope that applies now. Thanks!

Cheers

Marcel