[PATCH v3 12/13] ARM: dts: imx6ull-colibri: move gpio-keys node to som dtsi

Marcel Ziswiler marcel at ziswiler.com
Fri May 6 06:24:15 PDT 2022


From: Marcel Ziswiler <marcel.ziswiler at toradex.com>

The gpio-keys define module level wake-up pin functionality. Move it
from the carrier board dts file to the Som dtsi file.
While at it, also re-order the properties in the gpio-keys node
alphabetically and rename to sub-node from power to wakeup.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
---

(no changes since v1)

 arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 15 ---------------
 arch/arm/boot/dts/imx6ull-colibri.dtsi         | 16 +++++++++++++++-
 2 files changed, 15 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
index 08197c66af12..e29907428c20 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
@@ -8,20 +8,6 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
-
-		power {
-			label = "Wake-Up";
-			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
 	/* fixed crystal dedicated to mcp2515 */
 	clk16m: clk16m {
 		compatible = "fixed-clock";
@@ -29,7 +15,6 @@ clk16m: clk16m {
 		clock-frequency = <16000000>;
 	};
 
-
 	reg_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 4611fa890889..4292311bdc6e 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -24,6 +24,20 @@ backlight: backlight {
 		status = "okay";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+		wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
 	panel_dpi: panel-dpi {
 		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
@@ -707,7 +721,7 @@ MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x130b0
 
 	pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130a0	/* SODIMM 45 */
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130a0	/* SODIMM 45 / WAKE_UP */
 		>;
 	};
 
-- 
2.35.1




More information about the linux-arm-kernel mailing list