[PATCH v3 6/6] ARM: configs: at91: sama7_defconfig: add MCHP PDMC and DMIC drivers

[Nicolas Ferre]

On 05/05/2022 at 17:01, Mark Brown wrote:
> On Thu, May 05, 2022 at 02:47:04PM +0000,Codrin.Ciubotariu at microchip.com  wrote:
>> On 05.05.2022 16:58, Nicolas Ferre wrote:
>>> I'm fine with that, but I see that some Kconfig entries "select" this
>>> SND_SOC_DMIC directly (amd, intel, mediatek, stm).
>>> If it's absolutely needed for PDMC to work, what about doing the same as
>>> it would prevent some broken configurations?
>> The only way it makes sense to me to have this driver selected somewhere
>> is in a sound card driver, used for a specific board, which we know it
>> has PDM microphones. Since, for now, we use the simple sound card for
>> our audio interfaces, we have no place to add this select.
>> The reason I do not like to add this select under the controller driver,
>> as some of the vendors did, is because, in the future, we might have
>> different PDM microphones that might not work with SND_SOC_DMIC and
>> might need a different driver.
>> I don't have a strong opinion on this. If you think I am overthinking,
>> please let me know and I will change this.
> It's unlikely but possible that there could be some other device
> connected (eg, you could have a DSP or something that generates PDM
> output).  If the driver doesn't directly instantiate the DMIC itself
> then it's probably reasonable for it to be user controllable if the DMIC
> driver is there.

Fair enough, It makes perfect sense to me as it is then.
Thanks for the feedback!

Best regards,
   Nicolas

-- 
Nicolas Ferre