[PATCH v4 00/11] consolidated i.MX8MP HSIO/MEDIA/HDMI blk-ctrl series

[Shawn Guo]

On Wed, Apr 06, 2022 at 05:33:51PM +0200, Lucas Stach wrote:
> Hi all,
> 
> this series adds a bunch more power domains that integrate with the blk-ctrls
> to the i.MX8MP. It depends on the i.MX8MP GPCv2 support series posted in [1].
> 
> The HSIO blk-ctrl bindings are already applied upstream, so they are not part
> of this series anymore. The DT description hasn't changed, but the
> implementation of the HSIO blk-ctrl driver is reworked quite a bit from the
> last round of patches, so I've dropped the review/tested-by tags.
> 
> I've also picked up the pretty thoroughly reviewed and tested MEDIA blk-ctrl
> patches from Paul and Laurent into this series, as they would conflict with
> other patches from this series when applied separately. This should hopefully
> make it easier for Shawn to pick things up.
> 
> Finally this now also adds the HDMI blk-ctrl, not part of any previous series.
> This one is pretty complex and the documentation in the reference manual
> appears to be inaccurate. I found at least the following issues:
> 
> 1. GLOBAL_XTAL24M_CLK_EN does not actually gate the 24MHz reference clock,
> the PHY PLL happily locks and provides correct clocks without this clock being
> ungated. It seems to gate some clock input of the HDMI TX controller instead,
> register access to this controller fails without this clock.
> 
> 2. HDMI_RTX_RESET_CTL0 bits 6 and 7 are marked as "reserved" in the manual,
> but they are actually required to be configured. Bit 6 seems to keep something
> in the display pixel clock path in inactive state and Bit 7 seems to reset
> the HDMI TX i2c controller.
> 
> The HDMI blk-ctrl part is tested quite extensively with a PoC HDMI support
> patchset, which I will send out in a bit, so I'm pretty sure that the
> support as implemented is working. I've put the patches last in the series
> in case that this turns out to be controversial, so the other patches can
> be applied independent from the HDMI support.
> 
> Regards,
> Lucas
> 
> [1] https://lore.kernel.org/all/20220330104620.3600159-1-l.stach@pengutronix.de/
> 
> 
> Laurent Pinchart (1):
>   arm64: dts: imx8mp: Add MEDIAMIX power domains
> 
> Lucas Stach (7):
>   soc: imx: imx8m-blk-ctrl: set power device name
>   soc: imx: add i.MX8MP HSIO blk-ctrl
>   dt-bindings: power: imx8mp: add defines for HDMI blk-ctrl domains
>   dt-bindings: soc: add binding for i.MX8MP HDMI blk-ctrl
>   soc: imx: add i.MX8MP HDMI blk-ctrl
>   arm64: dts: imx8mp: add HSIO power-domains

>   arm64: dts: imx8mp: add HDMI power-domains

Applied all except this one.

Shawn

> 
> Paul Elder (3):
>   dt-bindings: soc: Add i.MX8MP media block control DT bindings
>   soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
>   arm64: dts: imx8mp: Add MEDIA_BLK_CTRL
> 
>  .../soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml     |  84 +++
>  .../soc/imx/fsl,imx8mp-media-blk-ctrl.yaml    | 104 +++
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi     | 153 +++-
>  drivers/soc/imx/Makefile                      |   1 +
>  drivers/soc/imx/imx8m-blk-ctrl.c              | 124 +++-
>  drivers/soc/imx/imx8mp-blk-ctrl.c             | 696 ++++++++++++++++++
>  include/dt-bindings/power/imx8mp-power.h      |  18 +
>  7 files changed, 1172 insertions(+), 8 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
>  create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml
>  create mode 100644 drivers/soc/imx/imx8mp-blk-ctrl.c
> 
> -- 
> 2.30.2
>