[PATCH] pinctrl: sunxi: f1c100s: Fix signal name comment for PA2 SPI pin

[Andre Przywara]

The manual describes function 0x6 of pin PA2 as "SPI1_CLK", so change
the comment to reflect that.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
index 2801ca7062732..8109efac341e2 100644
--- a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
+++ b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c
@@ -51,7 +51,7 @@ static const struct sunxi_desc_pin suniv_f1c100s_pins[] = {
 		  SUNXI_FUNCTION(0x3, "pwm0"),		/* PWM0 */
 		  SUNXI_FUNCTION(0x4, "i2s"),		/* IN */
 		  SUNXI_FUNCTION(0x5, "uart1"),		/* RX */
-		  SUNXI_FUNCTION(0x6, "spi1")),		/* MOSI */
+		  SUNXI_FUNCTION(0x6, "spi1")),		/* CLK */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 3),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-- 
2.25.1