[PATCH 2/2] dt-bindings: mmc: brcm, sdhci-brcmstb: cleanup example

[Ulf Hansson]

On Thu, 28 Apr 2022 at 10:18, Krzysztof Kozlowski
<krzysztof.kozlowski at linaro.org> wrote:
>
> Cleanup indentation and order of entries in example DTS.  The most
> important when reading the DTS are compatible and reg.  By convention
> they are usually to first entries.  No functional change.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

Applied for next, thanks!

Kind regards
Uffe


> ---
>  .../bindings/mmc/brcm,sdhci-brcmstb.yaml       | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
> index 54a0edab5f8c..b672202fff4e 100644
> --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
> +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
> @@ -65,15 +65,15 @@ unevaluatedProperties: false
>  examples:
>    - |
>      mmc at 84b0000 {
> -      sd-uhs-sdr50;
> -      sd-uhs-ddr50;
> -      sd-uhs-sdr104;
> -      sdhci,auto-cmd12;
>        compatible = "brcm,bcm7216-sdhci",
>                     "brcm,bcm7445-sdhci",
>                     "brcm,sdhci-brcmstb";
>        reg = <0x84b0000 0x260>, <0x84b0300 0x200>;
>        reg-names = "host", "cfg";
> +      sd-uhs-sdr50;
> +      sd-uhs-ddr50;
> +      sd-uhs-sdr104;
> +      sdhci,auto-cmd12;
>        interrupts = <0x0 0x26 0x4>;
>        interrupt-names = "sdio0_0";
>        clocks = <&scmi_clk 245>;
> @@ -81,6 +81,11 @@ examples:
>      };
>
>      mmc at 84b1000 {
> +      compatible = "brcm,bcm7216-sdhci",
> +                   "brcm,bcm7445-sdhci",
> +                   "brcm,sdhci-brcmstb";
> +      reg = <0x84b1000 0x260>, <0x84b1300 0x200>;
> +      reg-names = "host", "cfg";
>        mmc-ddr-1_8v;
>        mmc-hs200-1_8v;
>        mmc-hs400-1_8v;
> @@ -88,11 +93,6 @@ examples:
>        supports-cqe;
>        non-removable;
>        bus-width = <0x8>;
> -      compatible = "brcm,bcm7216-sdhci",
> -           "brcm,bcm7445-sdhci",
> -            "brcm,sdhci-brcmstb";
> -      reg = <0x84b1000 0x260>, <0x84b1300 0x200>;
> -      reg-names = "host", "cfg";
>        interrupts = <0x0 0x27 0x4>;
>        interrupt-names = "sdio1_0";
>        clocks = <&scmi_clk 245>;
> --
> 2.32.0
>