[PATCH v11 6/6] arm64: dts: allwinner: h616: Add X96 Mate TV box support

[Jernej Škrabec]

Similar comments as for OrangePi Zero2...

Dne petek, 29. april 2022 ob 01:09:33 CEST je Andre Przywara napisal(a):
> The X96 Mate is an Allwinner H616 based TV box, featuring:
>   - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU
>   - 2GiB/4GiB RAM (fully usable!)
>   - 16/32/64GiB eMMC
>   - 100Mbps Ethernet (via embedded AC200 EPHY, not yet supported)
>   - Unsupported Allwinner WiFi chip
>   - 2 x USB 2.0 host ports
>   - HDMI port
>   - IR receiver
>   - 5V/2A DC power supply via barrel plug
> 
> For more information see: https://linux-sunxi.org/X96_Mate

Please remove external links.

> 
> Add a basic devicetree for it, with SD card and eMMC working, as
> well as serial and the essential peripherals, like the AXP PMIC.
> 
> This DT is somewhat minimal, and should work on many other similar TV
> boxes with the Allwinner H616 chip.
> 
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
>  arch/arm64/boot/dts/allwinner/Makefile        |   1 +
>  .../dts/allwinner/sun50i-h616-x96-mate.dts    | 177 ++++++++++++++++++
>  2 files changed, 178 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
> 
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/
allwinner/Makefile
> index df2214e6d946..6a96494a2e0a 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -39,3 +39,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts b/arch/
arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
> new file mode 100644
> index 000000000000..aedb3a3dff38
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
> @@ -0,0 +1,177 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2021 Arm Ltd.

2022?

> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h616.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	model = "X96 Mate";
> +	compatible = "hechuang,x96-mate", "allwinner,sun50i-h616";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	reg_vcc5v: vcc5v {
> +		/* board wide 5V supply directly from the DC input */
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc-5v";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +	};
> +};
> +
> +&ir {
> +	status = "okay";
> +};
> +
> +&mmc0 {
> +	vmmc-supply = <&reg_dcdce>;
> +	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
> +	bus-width = <4>;
> +	status = "okay";
> +};
> +
> +&mmc2 {
> +	vmmc-supply = <&reg_dcdce>;
> +	vqmmc-supply = <&reg_bldo1>;
> +	bus-width = <8>;
> +	non-removable;
> +	cap-mmc-hw-reset;
> +	mmc-ddr-1_8v;
> +	mmc-hs200-1_8v;
> +	status = "okay";
> +};
> +
> +&r_rsb {
> +	status = "okay";
> +
> +	axp305: pmic at 745 {
> +		compatible = "x-powers,axp305", "x-powers,axp805",
> +			     "x-powers,axp806";
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +		reg = <0x745>;
> +
> +		x-powers,self-working-mode;
> +		vina-supply = <&reg_vcc5v>;
> +		vinb-supply = <&reg_vcc5v>;
> +		vinc-supply = <&reg_vcc5v>;
> +		vind-supply = <&reg_vcc5v>;
> +		vine-supply = <&reg_vcc5v>;
> +		aldoin-supply = <&reg_vcc5v>;
> +		bldoin-supply = <&reg_vcc5v>;
> +		cldoin-supply = <&reg_vcc5v>;
> +
> +		regulators {
> +			reg_aldo1: aldo1 {
> +				regulator-always-on;
> +				regulator-min-microvolt = 
<3300000>;
> +				regulator-max-microvolt = 
<3300000>;
> +				regulator-name = "vcc-sys";
> +			};
> +
> +			/* Enabled by the Android BSP */
> +			reg_aldo2: aldo2 {
> +				regulator-min-microvolt = 
<3300000>;
> +				regulator-max-microvolt = 
<3300000>;
> +				regulator-name = "vcc3v3-ext";
> +				status = "disabled";
> +			};
> +
> +			/* Enabled by the Android BSP */
> +			reg_aldo3: aldo3 {
> +				regulator-min-microvolt = 
<3300000>;
> +				regulator-max-microvolt = 
<3300000>;
> +				regulator-name = "vcc3v3-ext2";
> +				status = "disabled";
> +			};
> +
> +			reg_bldo1: bldo1 {
> +				regulator-always-on;
> +				regulator-min-microvolt = 
<1800000>;
> +				regulator-max-microvolt = 
<1800000>;
> +				regulator-name = "vcc1v8";
> +			};
> +
> +			/* Enabled by the Android BSP */
> +			reg_bldo2: bldo2 {
> +				regulator-min-microvolt = 
<1800000>;
> +				regulator-max-microvolt = 
<1800000>;
> +				regulator-name = "vcc1v8-2";
> +				status = "disabled";
> +			};
> +
> +			bldo3 {
> +				/* unused */
> +			};
> +
> +			bldo4 {
> +				/* unused */
> +			};
> +
> +			cldo1 {
> +				regulator-min-microvolt = 
<2500000>;
> +				regulator-max-microvolt = 
<2500000>;
> +				regulator-name = "vcc2v5";
> +			};
> +
> +			cldo2 {
> +				/* unused */
> +			};
> +
> +			cldo3 {
> +				/* unused */
> +			};
> +
> +			reg_dcdca: dcdca {
> +				regulator-always-on;
> +				regulator-min-microvolt = 
<810000>;
> +				regulator-max-microvolt = 
<1080000>;
> +				regulator-name = "vdd-cpu";
> +			};
> +
> +			reg_dcdcc: dcdcc {
> +				regulator-always-on;
> +				regulator-min-microvolt = 
<810000>;
> +				regulator-max-microvolt = 
<1080000>;
> +				regulator-name = "vdd-gpu-sys";
> +			};
> +
> +			reg_dcdcd: dcdcd {
> +				regulator-always-on;
> +				regulator-min-microvolt = 
<1360000>;
> +				regulator-max-microvolt = 
<1360000>;
> +				regulator-name = "vdd-dram";
> +			};
> +
> +			reg_dcdce: dcdce {
> +				regulator-boot-on;

Did you check if reboot (when booted from SD card) works? It should have same 
issue as OrangePi Zero2.

Please also check and add pio power supplies.

Best regards,
Jernej

> +				regulator-min-microvolt = 
<3300000>;
> +				regulator-max-microvolt = 
<3300000>;
> +				regulator-name = "vcc-eth-mmc";
> +			};
> +
> +			sw {
> +				/* unused */
> +			};
> +		};
> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_ph_pins>;
> +	status = "okay";
> +};
> -- 
> 2.35.3
> 
>