[PATCH v6 3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog
Hawkins, Nick
nick.hawkins at hpe.com
Tue May 3 09:22:35 PDT 2022
On 5/2/22 13:40, nick.hawkins at hpe.com wrote:
> > +#include <linux/of_address.h>
> > +#include <linux/of_platform.h>
> Where are those of_ includes used ?
They were not used anymore with latest changes. Thank you for pointing this out. I will remember to check in the future for each new commit to double check this.
> > +#define WDT_MAX_TIMEOUT_MS 655000
> Shouldn't that be 655350 ?
Yes it should be. I will correct this.
> > +static int gxp_wdt_set_timeout(struct watchdog_device *wdd,
> > + unsigned int timeout)
> > +{
> > + struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
> > + u32 actual;
> > +
> > + wdd->timeout = timeout;
> > + actual = min(timeout, wdd->max_hw_heartbeat_ms / 1000);
> > + writew(SECS_TO_WDOG_TICKS(actual), drvdata->base + GXP_WDT_CNT_OFS);
> First, the accuracy of actual is reduced to 1 second, then SECS_TO_WDOG_TICKS() multiplies the result with 100, meaning the actual accuracy is 10ms. Why not just use 10 ms ?
> actual = min(timeout * 100, wdd->max_hw_heartbeat_ms / 10);
> writew(actual, drvdata->base + GXP_WDT_CNT_OFS);
I have replaced the mention code with what you recommended above.
> > +
> > +static int gxp_restart(struct watchdog_device *wdd, unsigned long action,
> > + void *data)
> > +{
> > + struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
> > +
> > + writew(10, drvdata->base + GXP_WDT_CNT_OFS);
> Doesn't that translate to 100 ms timeout ? Why such a large reboot delay instead of writing 1 ?
This has been changed to 1.
> > + gxp_wdt_enable_reload(drvdata);
> > + mdelay(100);
> > + return 0;
> > +}
> > +
> > +static int gxp_wdt_probe(struct platform_device *pdev) {
> > + struct device *dev = &pdev->dev;
> > + struct gxp_wdt *drvdata;
> > + int err;
> > + u8 val;
> > +
> > + drvdata = devm_kzalloc(dev, sizeof(struct gxp_wdt), GFP_KERNEL);
> > + if (!drvdata)
> > + return -ENOMEM;
> > +
> > + drvdata->base = (void __iomem *)dev->platform_data;
> I'd personaly prefer if the address was passed as resource.
Just to clarify for my understanding are you asking that in the device structure I use the "void *platform_data" to pass "struct *resource"? If I am incorrect here can you elaborate on what you would like to be done? Based on feedback in review for the device tree; the watchdog is being created as a child to the timer. Therefore the conclusion reached was there should not be a gxp-wdt listed in the device tree files. I took this implementation based on what I found in ixp4xx_wdt.c.
Thank you for your time and feedback Guenter,
-Nick Hawkins
More information about the linux-arm-kernel
mailing list