[PATCH v4 11/13] ARM: dts: lan966x: add serdes node

[Michael Walle]

Add the SerDes node. On the LAN966x SoC these SerDes are used to connect
network PHYs.

By default, that node is disabled.

Signed-off-by: Michael Walle <michael at walle.cc>
---
 arch/arm/boot/dts/lan966x.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
index 7020b31322d8..d8185f5c7bfc 100644
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -500,6 +500,14 @@ hwmon: hwmon at e2010180 {
 			clocks = <&sys_clk>;
 		};
 
+		serdes: serdes at e202c000 {
+			compatible = "microchip,lan966x-serdes";
+			reg = <0xe202c000 0x9c>,
+			      <0xe2004010 0x4>;
+			#phy-cells = <2>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller at e8c11000 {
 			compatible = "arm,gic-400", "arm,cortex-a7-gic";
 			#interrupt-cells = <3>;
-- 
2.30.2