[PATCH v1 4/4] arm64: dts: imx8mm.dtsi: Add resets for dispmix power domain.

[Lucas Stach]

Am Montag, dem 02.05.2022 um 12:02 +0200 schrieb Viraj Shah:
> The resets are controlled from src. From reference manual page
> 959, display controller needs DISP_RESET bit to be set to reset
> dispmix.
> 
This reset is driven by the GPC hardware logic. Only if you are 100%
sure that this is not the case should a reset be added to the DT, as
handling it both from the GPC HW sequencing and software has proven to
be problematic and result in sporadic hangs.

Regards,
Lucas

> Signed-off-by: Viraj Shah <viraj.shah at linutronix.de>
> ---
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index 1ee05677c2dd..11a6cae5bb99 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -734,6 +734,7 @@
>  						assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
>  									 <&clk IMX8MM_SYS_PLL1_800M>;
>  						assigned-clock-rates = <500000000>, <200000000>;
> +						resets = <&src IMX8MQ_RESET_DISP_RESET>;
>  					};
>  
>  					pgc_mipi: power-domain at 11 {