[PATCH v1 0/4] imx8mm display controller power sequence

[Viraj Shah]

This patch queue addresses the power sequence of the display controller
of the imx8mm SoC. The sequence mentioned in example code 5 in section
5.2.9.5 of reference manual imx-8MMini-yhsc.pdf was not being performed.
This meant that the display controller was not coming up.

Viraj Shah (4):
  soc: imx: gpcv2: Power sequence for DISP
  soc: imx: imx8m-blk-ctrl: Display Power ON sequence
  soc: imx: imx8m-blk-ctrl: Add reset bits for mipi dsi phy
  arm64: dts: imx8mm.dtsi: Add resets for dispmix power domain.

 arch/arm64/boot/dts/freescale/imx8mm.dtsi |  1 +
 drivers/soc/imx/gpcv2.c                   | 36 +++++++++++++++++++----
 drivers/soc/imx/imx8m-blk-ctrl.c          |  9 ++++--
 3 files changed, 38 insertions(+), 8 deletions(-)

-- 
2.20.1