[PATCH v4 20/22] arm64: dts: mt8192: Add dsi node

[Matthias Brugger]

On 18/03/2022 15:45, Allen-KH Cheng wrote:
> Add dsi ndoe for mt8192 SoC.
> 
> Signed-off-by: Allen-KH Cheng <allen-kh.cheng at mediatek.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8192.dtsi | 16 ++++++++++++++++
>   1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> index 59183fb6c80b..08e0dd2483d1 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> @@ -13,6 +13,7 @@
>   #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
>   #include <dt-bindings/phy/phy.h>
>   #include <dt-bindings/power/mt8192-power.h>
> +#include <dt-bindings/reset/mt8192-resets.h>
>   #include <dt-bindings/reset/ti-syscon.h>
>   
>   / {
> @@ -1203,6 +1204,7 @@
>   			compatible = "mediatek,mt8192-mmsys", "syscon";
>   			reg = <0 0x14000000 0 0x1000>;
>   			#clock-cells = <1>;
> +			#reset-cells = <1>;
>   		};
>   
>   		mutex: mutex at 14001000 {
> @@ -1327,6 +1329,20 @@
>   			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
>   		};
>   
> +		dsi0: dsi at 14010000 {
> +			compatible = "mediatek,mt8183-dsi";
> +			reg = <0 0x14010000 0 0x1000>;
> +			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&mmsys CLK_MM_DSI0>,
> +				 <&mmsys CLK_MM_DSI_DSI0>,
> +				 <&mipi_tx0>;
> +			clock-names = "engine", "digital", "hs";
> +			resets = <&mmsys MT8192_MMSYS_SW0_RST_B_DISP_DSI0>;
> +			phys = <&mipi_tx0>;
> +			phy-names = "dphy";
> +			status = "disabled";

We are missing the output port node.

Regards,
Matthias

> +		};
> +
>   		ovl_2l2: ovl at 14014000 {
>   			compatible = "mediatek,mt8192-disp-ovl-2l";
>   			reg = <0 0x14014000 0 0x1000>;