[PATCH 1/5] dt-bindings: mmc: imx-esdhc: Update compatible fallbacks

[Krzysztof Kozlowski]

On 27/03/2022 14:38, Adam Ford wrote:
> The SDHC controller in the imx8mn and imx8mp have the same controller
> as the imx8mm which is slightly different than that of the imx7d.
> Using the fallback of the imx8mm enables the controllers to support
> HS400-ES which is not available on the imx7d. After discussion with NXP,
> it turns out that the imx8qm should fall back to the imx8qxp, because
> those have some additional flags not present in the imx8mm.
> 
> Suggested-by: haibo.chen at nxp.com
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> ---
> V2:  Added suggested-by note and imx8qxp updates.
> ---
>  .../devicetree/bindings/mmc/fsl-imx-esdhc.yaml   | 16 +++++++++-------
>  1 file changed, 9 insertions(+), 7 deletions(-)
> 

YAML and logic looks good, although I did not check the actual hardware
properties.
Reviewed-by: Krzysztof Kozlowski <krzk at kernel.org>


Best regards,
Krzysztof