[PATCH 1/3] arm64: meson: add dts bluetooth node for JetHub H1

[Vyacheslav Bocharov]

From: Vyacheslav Bocharov <devel at lexina.in>

Add bluetooth node for RTL8822CS uart to JetHub H1 dts file.

Signed-off-by: Vyacheslav Bocharov <adeep at lexina.in>
---
 .../boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts  | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index 6eafb908695f..a5ee7ed17efa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -213,6 +213,11 @@ &uart_A {
 	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
 	pinctrl-names = "default";
 	uart-has-rtscts;
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+       };
 };
 
 &uart_C {
-- 
2.30.2