[PATCH 2/2] arm64: dts: arm: add corstone1000 device tree
Rui Miguel Silva
rui.silva at linaro.org
Fri Mar 25 06:36:55 PDT 2022
Corstone1000 is a platform from arm, which includes pre
verified Corstone SSE710 sub-system that combines Cortex-A and
Cortex-M processors [0].
These device trees contains the necessary bits to support the
Corstone 1000 FVP (Fixed Virtual Platform) [1] and the
FPGA MPS3 board Cortex-A35 implementation at Cortex-A35 host
side of this platform. [2]
0: https://documentation-service.arm.com/static/619e02b1f45f0b1fbf3a8f16
1: https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps
2: https://documentation-service.arm.com/static/61f3f4d7fa8173727a1b71bf
Signed-off-by: Rui Miguel Silva <rui.silva at linaro.org>
---
arch/arm64/boot/dts/arm/Makefile | 1 +
arch/arm64/boot/dts/arm/corstone1000-fvp.dts | 31 ++++
arch/arm64/boot/dts/arm/corstone1000-mps3.dts | 38 +++++
arch/arm64/boot/dts/arm/corstone1000.dtsi | 151 ++++++++++++++++++
4 files changed, 221 insertions(+)
create mode 100644 arch/arm64/boot/dts/arm/corstone1000-fvp.dts
create mode 100644 arch/arm64/boot/dts/arm/corstone1000-mps3.dts
create mode 100644 arch/arm64/boot/dts/arm/corstone1000.dtsi
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index 4382b73baef5..d908e96d7ddc 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -6,3 +6,4 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb juno-scmi.dtb ju
dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += fvp-base-revc.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += corstone1000-fvp.dtb corstone1000-mps3.dtb
diff --git a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
new file mode 100644
index 000000000000..8f6ce94b4d5a
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited. All rights reserved.
+ *
+ */
+
+/dts-v1/;
+
+#include "corstone1000.dtsi"
+
+/ {
+ model = "ARM Corstone1000 FVP (Fixed Virtual Platform)";
+ compatible = "arm,corstone1000-fvp";
+
+ ethernet: eth at 4010000 {
+ compatible = "smsc,lan91c111";
+ reg = <0x40100000 0x10000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 116 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ reg-io-width = <2>;
+ smsc,irq-push-pull;
+ };
+
+};
+
+&refclk {
+ clock-frequency = <50000000>;
+};
diff --git a/arch/arm64/boot/dts/arm/corstone1000-mps3.dts b/arch/arm64/boot/dts/arm/corstone1000-mps3.dts
new file mode 100644
index 000000000000..922253f0af07
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/corstone1000-mps3.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited. All rights reserved.
+ *
+ */
+
+/dts-v1/;
+
+#include "corstone1000.dtsi"
+
+/ {
+ model = "ARM Corstone1000 FPGA MPS3 board";
+ compatible = "arm,corstone1000-mps3";
+
+ ethernet: eth at 4010000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x40100000 0x10000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <2>;
+ smsc,irq-push-pull;
+ };
+
+ usb: usb at 40200000 {
+ compatible = "nxp,usb-isp1763";
+ reg = <0x40200000 0x100000>;
+ interrupts-parent = <&gic>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <16>;
+ dr_mode = "host";
+ };
+};
+
+&refclk {
+ clock-frequency = <50000000>;
+};
diff --git a/arch/arm64/boot/dts/arm/corstone1000.dtsi b/arch/arm64/boot/dts/arm/corstone1000.dtsi
new file mode 100644
index 000000000000..eb423af84e9f
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/corstone1000.dtsi
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ stdout-path = "/uart at 1a510000:115200n8";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ };
+ };
+
+ memory at 88200000 {
+ device_type = "memory";
+ reg = <0x88200000 0x77e00000>;
+ };
+
+ gic: interrupt-controller at 1c000000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1c010000 0x1000>,
+ <0x1c02f000 0x2000>,
+ <0x1c04f000 0x1000>,
+ <0x1c06f000 0x2000>;
+ interrupts = <1 9 0xf08>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+
+ refclk100mhz: refclk100mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "apb_pclk";
+ };
+
+ smbclk: refclk24mhzx2 {
+ /* Reference 24MHz clock x 2 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ clock-output-names = "smclk";
+ };
+
+ uartclk: uartclk {
+ /* UART clock - 50MHz */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "uartclk";
+ };
+
+ serial0: uart at 1a510000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1a510000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ refclk: refclk at 1a220000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x1a220000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ frame at 1a230000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 2 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x1a230000 0x1000>;
+ };
+ };
+
+ mbox_es0mhu0: mhu at 1b000000 {
+ compatible = "arm,mhuv2","arm,primecell";
+ reg = <0x1b000000 0x1000>,
+ <0x1b010000 0x1000>;
+ clocks = <&refclk100mhz>;
+ clock-names = "apb_pclk";
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mhu_rx";
+ #mbox-cells = <1>;
+ mbox-name = "arm-es0-mhu0";
+ };
+
+ mbox_es0mhu1: mhu at 1b020000 {
+ compatible = "arm,mhuv2","arm,primecell";
+ reg = <0x1b020000 0x1000>,
+ <0x1b030000 0x1000>;
+ clocks = <&refclk100mhz>;
+ clock-names = "apb_pclk";
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mhu_rx";
+ #mbox-cells = <1>;
+ mbox-name = "arm-es0-mhu1";
+ };
+
+ mbox_semhu1: mhu at 1b820000 {
+ compatible = "arm,mhuv2","arm,primecell";
+ reg = <0x1b820000 0x1000>,
+ <0x1b830000 0x1000>;
+ clocks = <&refclk100mhz>;
+ clock-names = "apb_pclk";
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mhu_rx";
+ #mbox-cells = <1>;
+ mbox-name = "arm-se-mhu1";
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+};
--
2.35.1
More information about the linux-arm-kernel
mailing list