[PATCH v1 1/3] ARM: dts: aspeed: Add video engine

Jae Hyun Yoo quic_jaehyoo at quicinc.com
Thu Mar 24 06:48:57 PDT 2022


Hi Howard,

On 3/24/2022 12:27 AM, Howard Chiu wrote:
> The ast2600 SoC has an embedded video engine
> 
> Signed-off-by: Howard Chiu <howard_chiu at aspeedtech.com>
> ---
>   arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
>   1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
> index c32e87fad4dc..41d5087f7d92 100644
> --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> @@ -389,6 +389,17 @@ sbc: secure-boot-controller at 1e6f2000 {
>   				reg = <0x1e6f2000 0x1000>;
>   			};
>   
> +			video: video at 1e700000 {
> +				compatible = "aspeed,ast2600-video-engine";
> +				reg = <0x1e700000 0x1000>;
> +				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
> +					 <&syscon ASPEED_CLK_GATE_ECLK>;
> +				clock-names = "vclk", "eclk";
> +				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +				resets = <&syscon ASPEED_RESET_VIDEO>;

Video engine reset is handled by clk-ast2600.c so you don't need to add
'resets'.

> +				status = "disabled";
> +			};
> +

This node was already added back by this change.
https://lore.kernel.org/all/CACPK8XfPPLoS=mhwbAHY4EfVad=1_dnhB+gaHBjPj1wWbWE4gg@mail.gmail.com/

Cheers,

-Jae

>   			gpio0: gpio at 1e780000 {
>   				#gpio-cells = <2>;
>   				gpio-controller;



More information about the linux-arm-kernel mailing list