[PATCH 1/3] dt-bindings: mmc: imx-esdhc: Change imx8mn and imx8mp compatible fallback

[Adam Ford]

On Wed, Mar 23, 2022 at 8:56 AM Krzysztof Kozlowski <krzk at kernel.org> wrote:
>
> On 23/03/2022 14:40, Adam Ford wrote:
> > The SDHC controller in the imx8mn and imx8mp have the same controller
> > as the imx8mm which is slightly different than that of the imx7d.
> > Using the fallback of the imx8mm enables the controllers to support
> > HS400-ES which is not available on the imx7d.
> >
> > Signed-off-by: Adam Ford <aford173 at gmail.com>
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> > index 7dbbcae9485c..d6ea73d76bdd 100644
> > --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> > +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> > @@ -39,14 +39,14 @@ properties:
> >        - items:
> >            - enum:
> >                - fsl,imx8mm-usdhc
>
> Your change looks reasonable, but why imx8mm is compatible with imx7d?

I saw that, and I wasn't sure the best way to go about  fixing it.  If
I move the 8mm out of the imx7d category, do I need to add it to the
enum list associated with the imx8mm, or can I just delete it from the
enum leaving the const for imx8mm good enough?

I am not very good with YAML files yet, so please forgive my ignorance.

adam
>
> > -              - fsl,imx8mn-usdhc
> > -              - fsl,imx8mp-usdhc
> >                - fsl,imx8mq-usdhc
> >                - fsl,imx8qm-usdhc
> >                - fsl,imx8qxp-usdhc
> >            - const: fsl,imx7d-usdhc
> >        - items:
> >            - enum:
> > +              - fsl,imx8mn-usdhc
> > +              - fsl,imx8mp-usdhc
> >                - fsl,imx93-usdhc
> >                - fsl,imx8ulp-usdhc
> >            - const: fsl,imx8mm-usdhc
>
>
> Best regards,
> Krzysztof