[PATCH 1/2] remoteproc: elf_loader: skip segment with memsz as zero

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

Per elf specification,
p_filesz: This member gives the number of bytes in the file image of
the segment; it may be zero.
p_memsz: This member gives the number of bytes in the memory image
of the segment; it may be zero.

There is a case that i.MX DSP firmware has segment with PT_LOAD and
p_memsz/p_filesz set to zero. Such segment needs to be ignored,
otherwize rproc_da_to_va would report error.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/remoteproc/remoteproc_elf_loader.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
index d635d19a5aa8..cb77f9e4dc70 100644
--- a/drivers/remoteproc/remoteproc_elf_loader.c
+++ b/drivers/remoteproc/remoteproc_elf_loader.c
@@ -181,7 +181,14 @@ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
 		bool is_iomem = false;
 		void *ptr;
 
-		if (type != PT_LOAD)
+		/*
+		 *  There is a case that with PT_LOAD type, the
+		 *  filesz = memsz = 0. If memsz = 0, rproc_da_to_va
+		 *  should return NULL ptr, then error is returned.
+		 *  So this case should be skipped from the loop.
+		 *  Add !memsz checking here.
+		 */
+		if (type != PT_LOAD || !memsz)
 			continue;
 
 		dev_dbg(dev, "phdr: type %d da 0x%llx memsz 0x%llx filesz 0x%llx\n",
-- 
2.25.1