[PATCH v2 02/15] clk: mediatek: Add MT8186 mcusys clock support
Chun-Jie Chen
chun-jie.chen at mediatek.com
Tue Mar 22 01:30:17 PDT 2022
On Wed, 2022-03-09 at 18:13 +0800, Chen-Yu Tsai wrote:
> Hi,
>
> On Mon, Feb 21, 2022 at 9:59 AM Chun-Jie Chen
> <chun-jie.chen at mediatek.com> wrote:
> >
> > Add MT8186 mcusys clock controller which provides muxes
> > to select the clock source of APMCU.
> >
> > Signed-off-by: Chun-Jie Chen <chun-jie.chen at mediatek.com>
> > Acked-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno at collabora.com>
> > ---
> > drivers/clk/mediatek/Kconfig | 8 ++
> > drivers/clk/mediatek/Makefile | 1 +
> > drivers/clk/mediatek/clk-mt8186-mcu.c | 106
> > ++++++++++++++++++++++++++
> > 3 files changed, 115 insertions(+)
> > create mode 100644 drivers/clk/mediatek/clk-mt8186-mcu.c
> >
> > diff --git a/drivers/clk/mediatek/Kconfig
> > b/drivers/clk/mediatek/Kconfig
> > index 01ef02c54725..d5936cfb3bee 100644
> > --- a/drivers/clk/mediatek/Kconfig
> > +++ b/drivers/clk/mediatek/Kconfig
> > @@ -512,6 +512,14 @@ config COMMON_CLK_MT8183_VENCSYS
> > help
> > This driver supports MediaTek MT8183 vencsys clocks.
> >
> > +config COMMON_CLK_MT8186
> > + bool "Clock driver for MediaTek MT8186"
> > + depends on ARM64 || COMPILE_TEST
> > + select COMMON_CLK_MEDIATEK
> > + default ARCH_MEDIATEK
> > + help
> > + This driver supports MediaTek MT8186 clocks.
> > +
> > config COMMON_CLK_MT8192
> > bool "Clock driver for MediaTek MT8192"
> > depends on ARM64 || COMPILE_TEST
> > diff --git a/drivers/clk/mediatek/Makefile
> > b/drivers/clk/mediatek/Makefile
> > index 7b0c2646ce4a..677fa4f0eea2 100644
> > --- a/drivers/clk/mediatek/Makefile
> > +++ b/drivers/clk/mediatek/Makefile
> > @@ -71,6 +71,7 @@ obj-$(CONFIG_COMMON_CLK_MT8183_MFGCFG) += clk-
> > mt8183-mfgcfg.o
> > obj-$(CONFIG_COMMON_CLK_MT8183_MMSYS) += clk-mt8183-mm.o
> > obj-$(CONFIG_COMMON_CLK_MT8183_VDECSYS) += clk-mt8183-vdec.o
> > obj-$(CONFIG_COMMON_CLK_MT8183_VENCSYS) += clk-mt8183-venc.o
> > +obj-$(CONFIG_COMMON_CLK_MT8186) += clk-mt8186-mcu.o
> > obj-$(CONFIG_COMMON_CLK_MT8192) += clk-mt8192.o
> > obj-$(CONFIG_COMMON_CLK_MT8192_AUDSYS) += clk-mt8192-aud.o
> > obj-$(CONFIG_COMMON_CLK_MT8192_CAMSYS) += clk-mt8192-cam.o
> > diff --git a/drivers/clk/mediatek/clk-mt8186-mcu.c
> > b/drivers/clk/mediatek/clk-mt8186-mcu.c
> > new file mode 100644
> > index 000000000000..6d82c5de16c1
> > --- /dev/null
> > +++ b/drivers/clk/mediatek/clk-mt8186-mcu.c
> > @@ -0,0 +1,106 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +//
> > +// Copyright (c) 2022 MediaTek Inc.
> > +// Author: Chun-Jie Chen <chun-jie.chen at mediatek.com>
> > +
> > +#include "clk-mtk.h"
>
> Please move local headers after global ones. And please do this for
> all
> patches.
>
> > +
> > +#include <dt-bindings/clock/mt8186-clk.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/platform_device.h>
> > +
> > +static DEFINE_SPINLOCK(mt8186_clk_lock);
> > +
> > +static const char * const mcu_armpll_ll_parents[] = {
> > + "clk26m",
> > + "armpll_ll",
> > + "mainpll",
> > + "univpll_d2"
> > +};
> > +
> > +static const char * const mcu_armpll_bl_parents[] = {
> > + "clk26m",
> > + "armpll_bl",
> > + "mainpll",
> > + "univpll_d2"
> > +};
> > +
> > +static const char * const mcu_armpll_bus_parents[] = {
> > + "clk26m",
> > + "ccipll",
> > + "mainpll",
> > + "univpll_d2"
> > +};
> > +
> > +static struct mtk_composite mcu_muxes[] = {
> > + /* CPU_PLLDIV_CFG0 */
> > + MUX(CLK_MCU_ARMPLL_LL_SEL, "mcu_armpll_ll_sel",
> > mcu_armpll_ll_parents, 0x2A0, 9, 2),
>
> Can you add a comment stating that these registers have other bits
> that
> should not be touched? Otherwise anyone reading the datasheet might
> consider this to be incomplete.
>
> I assume the other bits (such as one field that looks like a divider)
> are
> configured in the bootloader, or the POR defaults are correct.
>
Yes, We only control mux in linux side and keep same value in divider.
I will add more description in v4. Sorry I missed this comment before.
> > + /* CPU_PLLDIV_CFG1 */
> > + MUX(CLK_MCU_ARMPLL_BL_SEL, "mcu_armpll_bl_sel",
> > mcu_armpll_bl_parents, 0x2A4, 9, 2),
> > + /* BUS_PLLDIV_CFG */
> > + MUX(CLK_MCU_ARMPLL_BUS_SEL, "mcu_armpll_bus_sel",
> > mcu_armpll_bus_parents, 0x2E0, 9, 2),
> > +};
>
> Note: I've checked the register bits against the datasheet.
>
> > +
> > +static const struct of_device_id of_match_clk_mt8186_mcu[] = {
> > + { .compatible = "mediatek,mt8186-mcusys", },
> > + {}
> > +};
> > +
> > +static int clk_mt8186_mcu_probe(struct platform_device *pdev)
> > +{
> > + struct clk_onecell_data *clk_data;
> > + struct device_node *node = pdev->dev.of_node;
> > + int r;
> > + void __iomem *base;
> > +
> > + clk_data = mtk_alloc_clk_data(CLK_MCU_NR_CLK);
> > + if (!clk_data)
> > + return -ENOMEM;
> > +
> > + base = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(base)) {
> > + r = PTR_ERR(base);
> > + goto free_mcu_data;
> > + }
> > +
> > + r = mtk_clk_register_composites(mcu_muxes,
> > ARRAY_SIZE(mcu_muxes), base,
> > + &mt8186_clk_lock,
> > clk_data);
>
> I don't think you need the lock. None of the bit fields you have
> defined
> in this driver have overlapping registers.
>
>
> Regards
> ChenYu
>
Yes, the muxes register of big and little CPU are not overlapping,
I will remove the lock in next patch.
Thanks!
> > + if (r)
> > + goto free_mcu_data;
> > +
> > + r = of_clk_add_provider(node, of_clk_src_onecell_get,
> > clk_data);
> > + if (r)
> > + goto unregister_composite_muxes;
> > +
> > + platform_set_drvdata(pdev, clk_data);
> > +
> > + return r;
> > +
> > +unregister_composite_muxes:
> > + mtk_clk_unregister_composites(mcu_muxes,
> > ARRAY_SIZE(mcu_muxes), clk_data);
> > +free_mcu_data:
> > + mtk_free_clk_data(clk_data);
> > + return r;
> > +}
> > +
> > +static int clk_mt8186_mcu_remove(struct platform_device *pdev)
> > +{
> > + struct clk_onecell_data *clk_data =
> > platform_get_drvdata(pdev);
> > + struct device_node *node = pdev->dev.of_node;
> > +
> > + of_clk_del_provider(node);
> > + mtk_clk_unregister_composites(mcu_muxes,
> > ARRAY_SIZE(mcu_muxes), clk_data);
> > + mtk_free_clk_data(clk_data);
> > +
> > + return 0;
> > +}
> > +
> > +static struct platform_driver clk_mt8186_mcu_drv = {
> > + .probe = clk_mt8186_mcu_probe,
> > + .remove = clk_mt8186_mcu_remove,
> > + .driver = {
> > + .name = "clk-mt8186-mcu",
> > + .of_match_table = of_match_clk_mt8186_mcu,
> > + },
> > +};
> > +builtin_platform_driver(clk_mt8186_mcu_drv);
> > --
> > 2.18.0
> >
More information about the linux-arm-kernel
mailing list