[PATCH v4 13/22] arm64: dts: mt8192: Add mipi_tx node

[allen-kh.cheng]

On Mon, 2022-03-21 at 18:41 -0400, Nícolas F. R. A. Prado wrote:
> On Fri, Mar 18, 2022 at 10:45:25PM +0800, Allen-KH Cheng wrote:
> > Add mipi_tx node for mt8192 SoC.
> > 
> > Signed-off-by: Allen-KH Cheng <allen-kh.cheng at mediatek.com>
> > ---
> >  arch/arm64/boot/dts/mediatek/mt8192.dtsi | 10 ++++++++++
> >  1 file changed, 10 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > index 2648f2847993..6b769fa5b427 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > @@ -1110,6 +1110,16 @@
> >  			};
> >  		};
> >  
> > +		mipi_tx0: dsi-dphy at 11e50000 {
> 
> Typo here, should be dsi-phy, not dsi-dphy.
> 
> Other than that,
> 
> Reviewed-by: Nícolas F. R. A. Prado <nfraprado at collabora.com>

Hi Nícolas

Thanks for reminding me. 

I will pay attention next time and update in v5.

Best regards,
Allen

> 
> > +			compatible = "mediatek,mt8183-mipi-tx";
> > +			reg = <0 0x11e50000 0 0x1000>;
> > +			clocks = <&apmixedsys CLK_APMIXED_MIPID26M>;
> > +			#clock-cells = <0>;
> > +			#phy-cells = <0>;
> > +			clock-output-names = "mipi_tx0_pll";
> > +			status = "disabled";
> > +		};
> > +
> >  		i2c0: i2c at 11f00000 {
> >  			compatible = "mediatek,mt8192-i2c";
> >  			reg = <0 0x11f00000 0 0x1000>,
> > -- 
> > 2.18.0
> > 
> >