[PATCH 1/2] arm64: dts: uDPU: update partition table

[Andrew Lunn]

On Mon, Mar 21, 2022 at 01:47:21PM +0100, Robert Marko wrote:
> On Mon, Mar 21, 2022 at 1:41 PM Andrew Lunn <andrew at lunn.ch> wrote:
> >
> > On Mon, Mar 21, 2022 at 01:17:27PM +0100, Robert Marko wrote:
> > > Partition currently called "uboot" does not only contain U-boot, but
> > > rather it contains TF-A, U-boot and U-boot environment.
> > >
> > > So, to avoid accidentally deleting the U-boot environment which is
> > > located at 0x180000 split the partition.
> > >
> > > "uboot" is not the correct name as you can't boot these boards with U-boot
> > > only, TF-A must be present as well, so rename the "uboot" partition to
> > > "firmware".
> >
> > Are there any ABI issues here? If these names are being used
> > somewhere, you are potentially breaking the boot. At minimum, i would
> > like to see something in the commit message which indicates you have
> > considered this and why you don't expect it to be a problem.
> 
> Hi Andrew, this won't break booting as BootROM does not care about
> partitions nor naming, it will just go to 0x0 of the NOR and boot it.
> 
> The same renaming had already been done:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/arm64/boot/dts/marvell?h=v5.17&id=a9d9bfcadfb43b856dbcf9419de75f7420d5a225
> 
> I can update the commit message if required.

Yes, please. It is always good to indicate you have thought about
issues like this. Not breaking the ABI is very important, and could
result in this getting reverted at some point. So indicating why you
think this is safe is useful information.

      Andrew