On Sun, Mar 20, 2022 at 12:48 AM Guenter Roeck <linux at roeck-us.net> wrote:
>
> On 3/19/22 02:28, Geert Uytterhoeven wrote:
> > Hi Alistair,
> >
> > On Sat, Mar 19, 2022 at 3:36 AM Alistair Francis <alistair23 at gmail.com> wrote:
> >> On Tue, Mar 8, 2022 at 8:53 PM Geert Uytterhoeven <geert at linux-m68k.org> wrote:
> >>> Thanks for your patch, which is now commit bae5a4acef67db88
> >>> ("mfd: simple-mfd-i2c: Add a Kconfig name") in mfd/for-mfd-next.
> >>>
> >>> On Mon, Jan 24, 2022 at 1:24 PM Alistair Francis <alistair at alistair23.me> wrote:
> >>>> Add a Kconfig name to the "Simple Multi-Functional Device support (I2C)"
> >>>> device so that it can be enabled via menuconfig.
> >>>
> >>> Which still does not explain why this would be needed...
> >>>
> >>>> Signed-off-by: Alistair Francis <alistair at alistair23.me>
> >>>> Acked-for-MFD-by: Lee Jones <lee.jones at linaro.org>
> >>>
> >>>> --- a/drivers/mfd/Kconfig
> >>>> +++ b/drivers/mfd/Kconfig
> >>>> @@ -1188,7 +1188,7 @@ config MFD_SI476X_CORE
> >>>> module will be called si476x-core.
> >>>>
> >>>> config MFD_SIMPLE_MFD_I2C
> >>>> - tristate
> >>>> + tristate "Simple Multi-Functional Device support (I2C)"
> >>>> depends on I2C
> >>>> select MFD_CORE
> >>>> select REGMAP_I2C
> >>>
> >>> The help text states:
> >>>
> >>> | This driver creates a single register map with the intention for it
> >>> | to be shared by all sub-devices.
> >>>
> >>> Yes, that's what MFD does?
> >>>
> >>> | Once the register map has been successfully initialised, any
> >>> | sub-devices represented by child nodes in Device Tree will be
> >>> | subsequently registered.
> >>>
> >>> OK...?
> >>>
> >>> Still, no clue about what this driver really does, and why and when
> >>> it would be needed.
> >>>
> >>> There is one driver symbol that selects MFD_SIMPLE_MFD_I2C.
> >>> There are no driver symbols that depend on this symbol.
> >>>
> >>> If you have a driver in the pipeline that can make use of this,
> >>> can't it just select MFD_SIMPLE_MFD_I2C, so the symbol itself can
> >>> stay invisible?
> >>
> >> My patch "mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a"
> >> allows using this driver for the silergy,sy7636a MFD. So it's nice to
> >> be able to enable and disable it as required.
> >
> > So after that patch, enabling MFD_SIMPLE_MFD_I2C will enable
> > support for an ever-growing random bunch of devices, none of which
> > is described in the help text?
> > To me, ghat doesn't look like the way to go forward...
> >
>
> I am probably missing something. Why not something like the following ?
>
> config MFD_SY7636A
> tristate "Silergy SY7636A voltage regulator"
> depends on I2C
> select MFD_SIMPLE_MFD_I2C
> help
> Enable support for Silergy SY7636A voltage regulator.
>
> To enable support for building sub-devices as modules,
> choose M here.
>
>
> This would be quite similar to MFD_SL28CPLD which essentially does
> the same (and, unless I am missing something, doesn't have its own
> driver either). Sub-devices would then depend on MFD_SY7636A.
That's fine with me.
As you said this patch is already in the mfd/for-mfd-next tree, should
I resend the series?
Alistair
>
> Guenter
>
> > Gr{oetje,eeting}s,
> >
> > Geert
> >
> > --
> > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
> >
> > In personal conversations with technical people, I call myself a hacker. But
> > when I'm talking to journalists I just say "programmer" or something like that.
> > -- Linus Torvalds
>