[PATCH v3 2/6] MIPS: mscc: ocelot: rename pinctrl nodes

[Michael Walle]

The pinctrl device tree binding will be converted to YAML format. Rename
the pin nodes so they end with "-pins" to match the schema.

Signed-off-by: Michael Walle <michael at walle.cc>
---
 arch/mips/boot/dts/mscc/ocelot.dtsi       | 4 ++--
 arch/mips/boot/dts/mscc/ocelot_pcb120.dts | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index e51db651af13..cfc219a72bdd 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -225,7 +225,7 @@ uart2_pins: uart2-pins {
 				function = "uart2";
 			};
 
-			miim1: miim1 {
+			miim1_pins: miim1-pins {
 				pins = "GPIO_14", "GPIO_15";
 				function = "miim";
 			};
@@ -261,7 +261,7 @@ mdio1: mdio at 10700c0 {
 			reg = <0x10700c0 0x24>;
 			interrupts = <15>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&miim1>;
+			pinctrl-0 = <&miim1_pins>;
 			status = "disabled";
 		};
 
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
index bd240690cb37..d348742c233d 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
@@ -22,12 +22,12 @@ memory at 0 {
 };
 
 &gpio {
-	phy_int_pins: phy_int_pins {
+	phy_int_pins: phy-int-pins {
 		pins = "GPIO_4";
 		function = "gpio";
 	};
 
-	phy_load_save_pins: phy_load_save_pins {
+	phy_load_save_pins: phy-load-save-pins {
 		pins = "GPIO_10";
 		function = "ptp2";
 	};
@@ -40,7 +40,7 @@ &mdio0 {
 &mdio1 {
 	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&miim1>, <&phy_int_pins>, <&phy_load_save_pins>;
+	pinctrl-0 = <&miim1_pins>, <&phy_int_pins>, <&phy_load_save_pins>;
 
 	phy7: ethernet-phy at 0 {
 		reg = <0>;
-- 
2.30.2