[PATCH v2 4/8] MIPS: mscc: ocelot: fix load/save GPIO pinctrl name

[Krzysztof Kozlowski]

On 18/03/2022 21:25, Michael Walle wrote:
> The pinctrl device tree binding will be converted to YAML format. All
> the pin nodes should end with "-pins". Fix them.
> 
> Fixes: 15324652f612 ("MIPS: dts: ocelot: describe the load/save GPIO")

There is no bug here, so no need for fix.

> Signed-off-by: Michael Walle <michael at walle.cc>
> ---
>  arch/mips/boot/dts/mscc/ocelot_pcb120.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
> index cda6c5ff58ad..d348742c233d 100644
> --- a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
> +++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
> @@ -27,7 +27,7 @@ phy_int_pins: phy-int-pins {
>  		function = "gpio";
>  	};
>  
> -	phy_load_save_pins: phy_load_save_pins {
> +	phy_load_save_pins: phy-load-save-pins {
>  		pins = "GPIO_10";

This should be squashed with previous patch or with the next one. There
is no point to align names with dtschema/dt spec one by one. Make the
conversion per entire board file or SoC.


Best regards,
Krzysztof