[PATCH v2 8/8] dt-bindings: pinctrl: convert ocelot-pinctrl to YAML format

[Michael Walle]

Convert the ocelot-pinctrl device tree binding to the new YAML format.

Signed-off-by: Michael Walle <michael at walle.cc>
---
 .../bindings/pinctrl/mscc,ocelot-pinctrl.txt  |  42 -------
 .../bindings/pinctrl/mscc,ocelot-pinctrl.yaml | 108 ++++++++++++++++++
 2 files changed, 108 insertions(+), 42 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
deleted file mode 100644
index 5d84fd299ccf..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Microsemi Ocelot pin controller Device Tree Bindings
-----------------------------------------------------
-
-Required properties:
- - compatible		: Should be "mscc,ocelot-pinctrl",
-			  "mscc,jaguar2-pinctrl", "microchip,sparx5-pinctrl",
-			  "mscc,luton-pinctrl", "mscc,serval-pinctrl",
-			  "microchip,lan966x-pinctrl" or "mscc,servalt-pinctrl"
- - reg			: Address and length of the register set for the device
- - gpio-controller	: Indicates this device is a GPIO controller
- - #gpio-cells		: Must be 2.
-			  The first cell is the pin number and the
-			  second cell specifies GPIO flags, as defined in
-			  <dt-bindings/gpio/gpio.h>.
- - gpio-ranges		: Range of pins managed by the GPIO controller.
-
-
-The ocelot-pinctrl driver uses the generic pin multiplexing and generic pin
-configuration documented in pinctrl-bindings.txt.
-
-The following generic properties are supported:
- - function
- - pins
-
-Example:
-	gpio: pinctrl at 71070034 {
-		compatible = "mscc,ocelot-pinctrl";
-		reg = <0x71070034 0x28>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&gpio 0 0 22>;
-
-		uart_pins: uart-pins {
-				pins = "GPIO_6", "GPIO_7";
-				function = "uart";
-		};
-
-		uart2_pins: uart2-pins {
-				pins = "GPIO_12", "GPIO_13";
-				function = "uart2";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
new file mode 100644
index 000000000000..7149a6655623
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mscc,ocelot-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi Ocelot pin controller
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni at bootlin.com>
+  - Lars Povlsen <lars.povlsen at microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - microchip,lan966x-pinctrl
+      - microchip,sparx5-pinctrl
+      - mscc,jaguar2-pinctrl
+      - mscc,luton-pinctrl
+      - mscc,ocelot-pinctrl
+      - mscc,serval-pinctrl
+      - mscc,servalt-pinctrl
+
+  reg:
+    items:
+      - description: Base address
+      - description: Extended pin configuration registers
+    minItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+patternProperties:
+  '-pins$':
+    type: object
+    allOf:
+      - $ref: "pinmux-node.yaml"
+      - $ref: "pincfg-node.yaml"
+
+    properties:
+      function: true
+      pins: true
+      output-high: true
+      output-low: true
+      drive-strength: true
+
+    required:
+      - function
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,lan966x-pinctrl
+              - microchip,sparx5-pinctrl
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio: pinctrl at 71070034 {
+        compatible = "mscc,ocelot-pinctrl";
+        reg = <0x71070034 0x28>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&gpio 0 0 22>;
+
+        uart_pins: uart-pins {
+            pins = "GPIO_6", "GPIO_7";
+            function = "uart";
+        };
+
+        uart2_pins: uart2-pins {
+            pins = "GPIO_12", "GPIO_13";
+            function = "uart2";
+        };
+    };
+
+...
-- 
2.30.2