[PATCH 1/2] EDAC: synopsys: Add disable_intr support for V3.X Synopsys EDAC DDR

[Sherry Sun]

V3.X Synopsys EDAC DDR doesn't have the QOS Interrupt register, need
to change to use the ECC Clear Register to disable the interrupts.

Signed-off-by: Sherry Sun <sherry.sun at nxp.com>
---
 drivers/edac/synopsys_edac.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index f05ff02c0656..1b630f0be119 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -859,8 +859,11 @@ static void enable_intr(struct synps_edac_priv *priv)
 static void disable_intr(struct synps_edac_priv *priv)
 {
 	/* Disable UE/CE Interrupts */
-	writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
-			priv->baseaddr + DDR_QOS_IRQ_DB_OFST);
+	if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)
+		writel(0x0, priv->baseaddr + ECC_CLR_OFST);
+	else
+		writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
+		       priv->baseaddr + DDR_QOS_IRQ_DB_OFST);
 }
 
 static int setup_irq(struct mem_ctl_info *mci,
-- 
2.17.1