[PATCH] ARM: davinci: fix typos in comments

[Julia Lawall]

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall at inria.fr>

---
 arch/arm/mach-davinci/board-dm355-evm.c  |    4 ++--
 arch/arm/mach-davinci/board-dm365-evm.c  |    2 +-
 arch/arm/mach-davinci/board-dm644x-evm.c |    2 +-
 arch/arm/mach-davinci/devices.c          |    2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 3c5a9e3c128a..36983dd73904 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -222,7 +222,7 @@ static struct v4l2_input tvp5146_inputs[] = {
 
 /*
  * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
+ * output that goes to vpfe. There is a one to one correspondence
  * with tvp5146_inputs
  */
 static struct vpfe_route tvp5146_routes[] = {
@@ -295,7 +295,7 @@ static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
 #define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
 
 /*
- * The outputs available from VPBE + ecnoders. Keep the
+ * The outputs available from VPBE + encoders. Keep the
  * the order same as that of encoders. First those from venc followed by that
  * from encoders. Index in the output refers to index on a particular encoder.
  * Driver uses this index to pass it to encoder when it supports more than
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index b3bef74c982a..21cf356fcd01 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -535,7 +535,7 @@ static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = {
 #define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
 
 /*
- * The outputs available from VPBE + ecnoders. Keep the
+ * The outputs available from VPBE + encoders. Keep the
  * the order same as that of encoders. First those from venc followed by that
  * from encoders. Index in the output refers to index on a particular
  * encoder.Driver uses this index to pass it to encoder when it supports more
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index cce3a621eb20..1493f4a77e29 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -260,7 +260,7 @@ static struct v4l2_input dm644xevm_tvp5146_inputs[] = {
 
 /*
  * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
+ * output that goes to vpfe. There is a one to one correspondence
  * with tvp5146_inputs
  */
 static struct vpfe_route dm644xevm_tvp5146_routes[] = {
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 849e811fade7..781a619af1e1 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -245,7 +245,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 			/* Power-on 3.3V IO cells */
 			__raw_writel(0,
 				DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
-			/*Set up the pull regiter for MMC */
+			/*Set up the pull register for MMC */
 			davinci_cfg_reg(DM644X_MSTK);
 		}