[PATCH v9 1/4] gpu: drm: separate panel orientation property creating and value setting

Hsin-Yi Wang hsinyi at chromium.org
Fri Mar 18 00:48:22 PDT 2022


drm_dev_register() sets connector->registration_state to
DRM_CONNECTOR_REGISTERED and dev->registered to true. If
drm_connector_set_panel_orientation() is first called after
drm_dev_register(), it will fail several checks and results in following
warning.

Add a function to create panel orientation property and set default value
to UNKNOWN, so drivers can call this function to init the property earlier
, and let the panel set the real value later.

[    4.480976] ------------[ cut here ]------------
[    4.485603] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xb4/0xbc
<snip>
[    4.609772] Call trace:
[    4.612208]  __drm_mode_object_add+0xb4/0xbc
[    4.616466]  drm_mode_object_add+0x20/0x2c
[    4.620552]  drm_property_create+0xdc/0x174
[    4.624723]  drm_property_create_enum+0x34/0x98
[    4.629241]  drm_connector_set_panel_orientation+0x64/0xa0
[    4.634716]  boe_panel_get_modes+0x88/0xd8
[    4.638802]  drm_panel_get_modes+0x2c/0x48
[    4.642887]  panel_bridge_get_modes+0x1c/0x28
[    4.647233]  drm_bridge_connector_get_modes+0xa0/0xd4
[    4.652273]  drm_helper_probe_single_connector_modes+0x218/0x700
[    4.658266]  drm_mode_getconnector+0x1b4/0x45c
[    4.662699]  drm_ioctl_kernel+0xac/0x128
[    4.666611]  drm_ioctl+0x268/0x410
[    4.670002]  drm_compat_ioctl+0xdc/0xf0
[    4.673829]  __arm64_compat_sys_ioctl+0xc8/0x100
[    4.678436]  el0_svc_common+0xf4/0x1c0
[    4.682174]  do_el0_svc_compat+0x28/0x3c
[    4.686088]  el0_svc_compat+0x10/0x1c
[    4.689738]  el0_sync_compat_handler+0xa8/0xcc
[    4.694171]  el0_sync_compat+0x178/0x180
[    4.698082] ---[ end trace b4f2db9d9c88610b ]---
[    4.702721] ------------[ cut here ]------------
[    4.707329] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:243 drm_object_attach_property+0x48/0xb8
<snip>
[    4.833830] Call trace:
[    4.836266]  drm_object_attach_property+0x48/0xb8
[    4.840958]  drm_connector_set_panel_orientation+0x84/0xa0
[    4.846432]  boe_panel_get_modes+0x88/0xd8
[    4.850516]  drm_panel_get_modes+0x2c/0x48
[    4.854600]  panel_bridge_get_modes+0x1c/0x28
[    4.858946]  drm_bridge_connector_get_modes+0xa0/0xd4
[    4.863984]  drm_helper_probe_single_connector_modes+0x218/0x700
[    4.869978]  drm_mode_getconnector+0x1b4/0x45c
[    4.874410]  drm_ioctl_kernel+0xac/0x128
[    4.878320]  drm_ioctl+0x268/0x410
[    4.881711]  drm_compat_ioctl+0xdc/0xf0
[    4.885536]  __arm64_compat_sys_ioctl+0xc8/0x100
[    4.890142]  el0_svc_common+0xf4/0x1c0
[    4.893879]  do_el0_svc_compat+0x28/0x3c
[    4.897791]  el0_svc_compat+0x10/0x1c
[    4.901441]  el0_sync_compat_handler+0xa8/0xcc
[    4.905873]  el0_sync_compat+0x178/0x180
[    4.909783] ---[ end trace b4f2db9d9c88610c ]---

Signed-off-by: Hsin-Yi Wang <hsinyi at chromium.org>
Reviewed-by: Sean Paul <seanpaul at chromium.org>
---
 drivers/gpu/drm/drm_connector.c | 58 +++++++++++++++++++++++++--------
 include/drm/drm_connector.h     |  2 ++
 2 files changed, 47 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 76a8c707c34b..149709e05622 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1252,7 +1252,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {
  *	INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
  *	coordinates, so if userspace rotates the picture to adjust for
  *	the orientation it must also apply the same transformation to the
- *	touchscreen input coordinates. This property is initialized by calling
+ *	touchscreen input coordinates. This property value is set by calling
  *	drm_connector_set_panel_orientation() or
  *	drm_connector_set_panel_orientation_with_quirk()
  *
@@ -2344,8 +2344,8 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
  * @connector: connector for which to set the panel-orientation property.
  * @panel_orientation: drm_panel_orientation value to set
  *
- * This function sets the connector's panel_orientation and attaches
- * a "panel orientation" property to the connector.
+ * This function sets the connector's panel_orientation value. If the property
+ * doesn't exist, it will try to create one.
  *
  * Calling this function on a connector where the panel_orientation has
  * already been set is a no-op (e.g. the orientation has been overridden with
@@ -2377,18 +2377,13 @@ int drm_connector_set_panel_orientation(
 
 	prop = dev->mode_config.panel_orientation_property;
 	if (!prop) {
-		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
-				"panel orientation",
-				drm_panel_orientation_enum_list,
-				ARRAY_SIZE(drm_panel_orientation_enum_list));
-		if (!prop)
+		if (drm_connector_init_panel_orientation_property(connector) < 0)
 			return -ENOMEM;
-
-		dev->mode_config.panel_orientation_property = prop;
+		prop = dev->mode_config.panel_orientation_property;
 	}
 
-	drm_object_attach_property(&connector->base, prop,
-				   info->panel_orientation);
+	drm_object_property_set_value(&connector->base, prop,
+				      info->panel_orientation);
 	return 0;
 }
 EXPORT_SYMBOL(drm_connector_set_panel_orientation);
@@ -2396,7 +2391,7 @@ EXPORT_SYMBOL(drm_connector_set_panel_orientation);
 /**
  * drm_connector_set_panel_orientation_with_quirk - set the
  *	connector's panel_orientation after checking for quirks
- * @connector: connector for which to init the panel-orientation property.
+ * @connector: connector for which to set the panel-orientation property.
  * @panel_orientation: drm_panel_orientation value to set
  * @width: width in pixels of the panel, used for panel quirk detection
  * @height: height in pixels of the panel, used for panel quirk detection
@@ -2423,6 +2418,43 @@ int drm_connector_set_panel_orientation_with_quirk(
 }
 EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
 
+/**
+ * drm_connector_init_panel_orientation_property -
+ * 	create the connector's panel orientation property
+ *
+ * This function attaches a "panel orientation" property to the connector
+ * and initializes its value to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
+ *
+ * The value of the property can be set by drm_connector_set_panel_orientation()
+ * or drm_connector_set_panel_orientation_with_quirk() later.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *prop;
+
+	if(dev->mode_config.panel_orientation_property)
+		return 0;
+
+	prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+			"panel orientation",
+			drm_panel_orientation_enum_list,
+			ARRAY_SIZE(drm_panel_orientation_enum_list));
+	if (!prop)
+		return -ENOMEM;
+
+	dev->mode_config.panel_orientation_property = prop;
+	drm_object_attach_property(&connector->base, prop,
+				   DRM_MODE_PANEL_ORIENTATION_UNKNOWN);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+
 static const struct drm_prop_enum_list privacy_screen_enum[] = {
 	{ PRIVACY_SCREEN_DISABLED,		"Disabled" },
 	{ PRIVACY_SCREEN_ENABLED,		"Enabled" },
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 5166186146f4..d972a9bc64a6 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1805,6 +1805,8 @@ int drm_connector_set_panel_orientation_with_quirk(
 	struct drm_connector *connector,
 	enum drm_panel_orientation panel_orientation,
 	int width, int height);
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector);
 int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
 					  int min, int max);
 void drm_connector_create_privacy_screen_properties(struct drm_connector *conn);
-- 
2.35.1.894.gb6a874cedc-goog




More information about the linux-arm-kernel mailing list