Report an error on GICv4.1 vcpu de-schedule

[Marc Zyngier]

Hi Jingyi,

On Thu, 17 Mar 2022 07:27:45 +0000,
Jingyi Wang <wangjingyi11 at huawei.com> wrote:
> 
> Hi Marc，
> 
> The patch "KVM: arm64: Delay the polling of the GICR_VPENDBASER.Dirty
> bit"(57e3cebd022fbc035dcf190ac789fd2ffc747f5b) remove the polling of
> GICR_VPENDBASER.Dirty bit in vcpu_load() , while check the VPT parsing
> ready in kvm_vgic_flush_hwstate() for better performance.
> 
> Most time it works, but we have met an error on our hardware recently.
> In preemptable kernel, the vcpu can be preempted between vcpu_load and
> kvm_vgic_flush_hwstate. As a result, it get de-scheduled and
> its_clear_vpend_valid() is called
> 
> 	val = gicr_read_vpendbaser(vlpi_base + GICR_VPENDBASER);
> 	val &= ~GICR_VPENDBASER_Valid;
> 	val &= ~clr;
> 	val |= set;
> 	gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
> 
> 
> The function clears Valid bit meanwhile GICR_VPENDBASER_Dirty
> maybe still 1, which cause the subsequent GICR_VPENDBASER_Dirty polling
> fail and report ""ITS virtual pending table not cleaning".
> 
> We have communicated with Martin from ARM and get the conclusion
> that we should not change valid bit while the dirty bit not clear——
> "The dirty bit reports whether the last schedule /de-schedule
> operation has completed.The restriction on not changing Valid when Dirty
> is 1, is so that hardware can always complete the last operation for
> starting the next".

Indeed, the spec is crystal clear about that, and clearing Valid while
Dirty is set is plain wrong.

> 
> I think maybe we can check dirty bit clear before clearing the valid bit
> in its_clear_vpend_valid() code. Hope to know your opinion about this
> issue.

Yes, that's what should happen. I came up with the patch below. Please
give it a shot and let me know if that helps. If it does, I'll queue
it as a fix.

Thanks,

	M.

From c23ccc9cfa603e30ac189d43af75f03b60d780bc Mon Sep 17 00:00:00 2001
From: Marc Zyngier <maz at kernel.org>
Date: Thu, 17 Mar 2022 09:49:02 +0000
Subject: [PATCH] irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear
 before descheduling

The way KVM drives GICv4.{0,1} is as follows:
- vcpu_load() makes the VPE resident, instructing the RD to start
  scanning for interrupts
- just before entering the guest, we check that the RD has finished
  scanning and that we can start running the vcpu
- on preemption, we deschedule the VPE by making it invalid on
  the RD

However, we are preemptible between the first two steps. If it so
happens *and* that the RD was still scanning, we nonetheless write
to the GICR_VPENDBASER register while Dirty is set, and bad things
happen (we're in UNPRED land).

This affects both the 4.0 and 4.1 implementations.

Make sure Dirty is cleared before performing the deschedule,
meaning that its_clear_vpend_valid() becomes a sort of full VPE
residency barrier.

Reported-by: Jingyi Wang <wangjingyi11 at huawei.com>
Signed-off-by: Marc Zyngier <maz at kernel.org>
Fixes: 57e3cebd022f ("KVM: arm64: Delay the polling of the GICR_VPENDBASER.Dirty
bit")
Link: https://lore.kernel.org/r/4aae10ba-b39a-5f84-754b-69c2eb0a2c03@huawei.com
---
 drivers/irqchip/irq-gic-v3-its.c | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 9e93ff2b6375..c9b1df980899 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -3011,18 +3011,12 @@ static int __init allocate_lpi_tables(void)
 	return 0;
 }
 
-static u64 its_clear_vpend_valid(void __iomem *vlpi_base, u64 clr, u64 set)
+static u64 read_vpend_dirty_clear(void __iomem *vlpi_base)
 {
 	u32 count = 1000000;	/* 1s! */
 	bool clean;
 	u64 val;
 
-	val = gicr_read_vpendbaser(vlpi_base + GICR_VPENDBASER);
-	val &= ~GICR_VPENDBASER_Valid;
-	val &= ~clr;
-	val |= set;
-	gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
-
 	do {
 		val = gicr_read_vpendbaser(vlpi_base + GICR_VPENDBASER);
 		clean = !(val & GICR_VPENDBASER_Dirty);
@@ -3033,10 +3027,26 @@ static u64 its_clear_vpend_valid(void __iomem *vlpi_base, u64 clr, u64 set)
 		}
 	} while (!clean && count);
 
-	if (unlikely(val & GICR_VPENDBASER_Dirty)) {
+	if (unlikely(!clean))
 		pr_err_ratelimited("ITS virtual pending table not cleaning\n");
+
+	return val;
+}
+
+static u64 its_clear_vpend_valid(void __iomem *vlpi_base, u64 clr, u64 set)
+{
+	u64 val;
+
+	/* Make sure we wait until the RD is done with the initial scan */
+	val = read_vpend_dirty_clear(vlpi_base);
+	val &= ~GICR_VPENDBASER_Valid;
+	val &= ~clr;
+	val |= set;
+	gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
+
+	val = read_vpend_dirty_clear(vlpi_base);
+	if (unlikely(val & GICR_VPENDBASER_Dirty))
 		val |= GICR_VPENDBASER_PendingLast;
-	}
 
 	return val;
 }
-- 
2.34.1


-- 
Without deviation from the norm, progress is not possible.