[PATCH v2] mmc: mtk-sd: Silence delay phase calculation debug log

[Ulf Hansson]

On Fri, 11 Mar 2022 at 11:33, Alexandre Bailon <abailon at baylibre.com> wrote:
>
> The driver prints the following log everytime data is written to RPMB:
> mtk-msdc 11230000.mmc: phase: [map:ffffffff] [maxlen:32] [final:10]
>
> dev_info is used to print that log but it seems that log is only
> useful for debbuging. Use dev_dbg instead of dev_info.
>
> Signed-off-by: Alexandre Bailon <abailon at baylibre.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>

Applied for next, thanks!

Kind regards
Uffe


> ---
>  drivers/mmc/host/mtk-sd.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index d5a9c269d492..05c8b4de46f3 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -1914,8 +1914,8 @@ static struct msdc_delay_phase get_best_delay(struct msdc_host *host, u32 delay)
>                 final_phase = (start_final + len_final / 3) % PAD_DELAY_MAX;
>         else
>                 final_phase = (start_final + len_final / 2) % PAD_DELAY_MAX;
> -       dev_info(host->dev, "phase: [map:%x] [maxlen:%d] [final:%d]\n",
> -                delay, len_final, final_phase);
> +       dev_dbg(host->dev, "phase: [map:%x] [maxlen:%d] [final:%d]\n",
> +               delay, len_final, final_phase);
>
>         delay_phase.maxlen = len_final;
>         delay_phase.start = start_final;
> --
> 2.34.1
>