[PATCH v2 1/3] Revert "ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode"

[Petr Štetiar]

This reverts commit 55dd7e059098ce4bd0a55c251cb78e74604abb57 as it
breaks network on my A20-olinuxino-lime2 hardware revision "K" which has
Micrel KSZ9031RNXCC-TR Gigabit PHY. Bastien has probably some previous
hardware revisions which were based on RTL8211E-VB-CG1 PHY and thus this
fix was working on his board.

Cc: stable at vger.kernel.org
Cc: Bastien Roucariès <rouca at debian.org>
References: https://github.com/openwrt/openwrt/issues/9153
References: https://github.com/OLIMEX/OLINUXINO/blob/master/HARDWARE/A20-OLinuXino-LIME2/hardware_revision_changes_log.txt
Signed-off-by: Petr Štetiar <ynezz at true.cz>
---
 arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index ecb91fb899ff..8077f1716fbc 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -112,7 +112,7 @@ &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii-id";
+	phy-mode = "rgmii";
 	status = "okay";
 };