[PATCH v21 2/3] Input: mt6779-keypad - Add MediaTek keypad driver
Mattijs Korpershoek
mkorpershoek at baylibre.com
Mon Mar 14 00:57:27 PDT 2022
On ven., mars 04, 2022 at 11:31, AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com> wrote:
> Il 03/03/22 16:43, Mattijs Korpershoek ha scritto:
>> From: "fengping.yu" <fengping.yu at mediatek.com>
>>
>> This patch adds matrix keypad support for Mediatek SoCs.
>>
>> Signed-off-by: fengping.yu <fengping.yu at mediatek.com>
>> Reviewed-by: Marco Felsch <m.felsch at pengutronix.de>
>> Reviewed-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
>> Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
>> Signed-off-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
>
> Hello Mattijs,
> thanks for the patch!
>
> However, to make it perfect, there's something to improve....
Hi Angelo,
Thank you for your detailed review, It's really appreciated!
>
>> ---
>> drivers/input/keyboard/Kconfig | 12 ++
>> drivers/input/keyboard/Makefile | 1 +
>> drivers/input/keyboard/mt6779-keypad.c | 215 +++++++++++++++++++++++++
>> 3 files changed, 228 insertions(+)
>> create mode 100644 drivers/input/keyboard/mt6779-keypad.c
>>
>> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
>> index 0c607da9ee10..03a9530f620e 100644
>> --- a/drivers/input/keyboard/Kconfig
>> +++ b/drivers/input/keyboard/Kconfig
>> @@ -779,6 +779,18 @@ config KEYBOARD_BCM
>> To compile this driver as a module, choose M here: the
>> module will be called bcm-keypad.
>>
>> +config KEYBOARD_MT6779
>> + tristate "MediaTek Keypad Support"
>> + depends on ARCH_MEDIATEK || COMPILE_TEST
>> + select REGMAP_MMIO
>> + select INPUT_MATRIXKMAP
>> + help
>> + Say Y here if you want to use the keypad on MediaTek SoCs.
>> + If unsure, say N.
>> +
>> + To compile this driver as a module, choose M here: the
>> + module will be called mt6779-keypad.
>> +
>> config KEYBOARD_MTK_PMIC
>> tristate "MediaTek PMIC keys support"
>> depends on MFD_MT6397
>> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
>> index e3c8648f834e..721936e90290 100644
>> --- a/drivers/input/keyboard/Makefile
>> +++ b/drivers/input/keyboard/Makefile
>> @@ -44,6 +44,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
>> obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
>> obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o
>> obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o
>> +obj-$(CONFIG_KEYBOARD_MT6779) += mt6779-keypad.o
>> obj-$(CONFIG_KEYBOARD_MTK_PMIC) += mtk-pmic-keys.o
>> obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
>> obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o
>> diff --git a/drivers/input/keyboard/mt6779-keypad.c b/drivers/input/keyboard/mt6779-keypad.c
>> new file mode 100644
>> index 000000000000..b207acdd1e2a
>> --- /dev/null
>> +++ b/drivers/input/keyboard/mt6779-keypad.c
>> @@ -0,0 +1,215 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2022 MediaTek Inc.
>> + * Author Fengping Yu <fengping.yu at mediatek.com>
>> + */
>> +#include <linux/bitops.h>
>> +#include <linux/clk.h>
>> +#include <linux/input/matrix_keypad.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/module.h>
>> +#include <linux/property.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +
>> +#define MTK_KPD_NAME "mt6779-keypad"
>> +#define MTK_KPD_MEM 0x0004
>> +#define MTK_KPD_DEBOUNCE 0x0018
>> +#define MTK_KPD_DEBOUNCE_MASK GENMASK(13, 0)
>> +#define MTK_KPD_DEBOUNCE_MAX_MS 256
>> +#define MTK_KPD_NUM_MEMS 5
>> +#define MTK_KPD_NUM_BITS 136 /* 4*32+8 MEM5 only use 8 BITS */
>> +
>> +struct mt6779_keypad {
>> + struct regmap *regmap;
>> + struct input_dev *input_dev;
>> + struct clk *clk;
>> + void __iomem *base;
>> + u32 n_rows;
>> + u32 n_cols;
>> + DECLARE_BITMAP(keymap_state, MTK_KPD_NUM_BITS);
>> +};
>> +
>> +static const struct regmap_config mt6779_keypad_regmap_cfg = {
>> + .reg_bits = 32,
>> + .val_bits = 32,
>> + .reg_stride = sizeof(u32),
>> + .max_register = 36,
>
> Are you sure that you can't use .fast_io = true?
I am not sure at all. I did not think twice about this.
>
> Another version for the same question:
> Are you sure that you need to lock with a mutex here, and not with a spinlock?
>
> Since you're performing reads over a MMIO, I think that there's a very good
> chance that you can use fast_io.
Thank you for this suggestion. I might send a follow-up series with this
improvement included.
Will cc you if I do.
>
>> +};
>> +
>> +static irqreturn_t mt6779_keypad_irq_handler(int irq, void *dev_id)
>> +{
>> + struct mt6779_keypad *keypad = dev_id;
>> + unsigned short *keycode = keypad->input_dev->keycode;
>> + DECLARE_BITMAP(new_state, MTK_KPD_NUM_BITS);
>> + DECLARE_BITMAP(change, MTK_KPD_NUM_BITS);
>> + int bit_nr;
>> + int pressed;
>> + unsigned short code;
>> + int row, col;
>> + int row_shift = get_count_order(keypad->n_cols);
>> +
>> + regmap_bulk_read(keypad->regmap, MTK_KPD_MEM,
>> + new_state, MTK_KPD_NUM_MEMS);
>> +
>> + bitmap_xor(change, new_state, keypad->keymap_state, MTK_KPD_NUM_BITS);
>> +
>> + for_each_set_bit(bit_nr, change, MTK_KPD_NUM_BITS) {
>> + /* For 32bits register, only bits [15:0] use to indicate key status */
>> + if (bit_nr % 32 >= 16)
>> + continue;
>> +
>> + /* 1: not pressed, 0: pressed */
>> + pressed = !test_bit(bit_nr, new_state);
>> + dev_dbg(&keypad->input_dev->dev, "%s",
>> + pressed ? "pressed" : "released");
>> +
>> + row = bit_nr / 32;
>> + col = bit_nr % 32;
>> +
>> + code = keycode[MATRIX_SCAN_CODE(row, col, row_shift)];
>> +
>> + input_report_key(keypad->input_dev, code, pressed);
>> + input_sync(keypad->input_dev);
>> +
>> + dev_dbg(&keypad->input_dev->dev,
>> + "report Linux keycode = %d\n", code);
>> + }
>> +
>> + bitmap_copy(keypad->keymap_state, new_state, MTK_KPD_NUM_BITS);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static void mt6779_keypad_clk_disable(void *data)
>> +{
>> + clk_disable_unprepare(data);
>> +}
>> +
>> +static int mt6779_keypad_pdrv_probe(struct platform_device *pdev)
>> +{
>> + struct mt6779_keypad *keypad;
>> + unsigned int irq;
>> + u32 debounce;
>> + bool wakeup;
>> + int error;
>> +
>> + keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
>> + if (!keypad)
>> + return -ENOMEM;
>> +
>> + keypad->base = devm_platform_ioremap_resource(pdev, 0);
>> + if (IS_ERR(keypad->base))
>> + return PTR_ERR(keypad->base);
>> +
>> + keypad->regmap = devm_regmap_init_mmio(&pdev->dev,
>> + keypad->base,
>> + &mt6779_keypad_regmap_cfg);
>
> Please use dev_err_probe() to simplify error handling in probe functions: you've
> done a great job with adding a devm action for the error cases, avoiding gotos to
> get out cleanly.. it would be a pity to not finish this to perfection.
>
> I'll give you two examples for this, so that you'll be all set.
>
> if (IS_ERR(keypad->regmap))
> return dev_err_probe(&pdev->dev, PTR_ERR(keypad->regmap),
> "regmap init failed\n");
>
> P.S.: No need for %pe here, as dev_err_probe prints the error number for you!
I did not know about dev_err_probe(). As far as I understand, it's not
recommended to be used for input drivers, but I'll definitely use it for
other subsystems.
>
>> + if (IS_ERR(keypad->regmap)) {
>> + dev_err(&pdev->dev,
>> + "regmap init failed:%pe\n", keypad->regmap);
>> + return PTR_ERR(keypad->regmap);
>> + }
>> +
>> + bitmap_fill(keypad->keymap_state, MTK_KPD_NUM_BITS);
>> +
>> + keypad->input_dev = devm_input_allocate_device(&pdev->dev);
>
> if (!keypad->input_dev)
> return dev_err_probe(&pdev->dev, -ENOMEM,
> "Cannot allocate input device\n");
>
>> + if (!keypad->input_dev) {
>> + dev_err(&pdev->dev, "Failed to allocate input dev\n");
>> + return -ENOMEM;
>> + }
>> +
>> + keypad->input_dev->name = MTK_KPD_NAME;
>> + keypad->input_dev->id.bustype = BUS_HOST;
>> +
>> + error = matrix_keypad_parse_properties(&pdev->dev, &keypad->n_rows,
>> + &keypad->n_cols);
>> + if (error) {
>> + dev_err(&pdev->dev, "Failed to parse keypad params\n");
>> + return error;
>> + }
>> +
>> + if (device_property_read_u32(&pdev->dev, "debounce-delay-ms",
>> + &debounce))
>> + debounce = 16;
>> +
>> + if (debounce > MTK_KPD_DEBOUNCE_MAX_MS) {
>> + dev_err(&pdev->dev, "Debounce time exceeds the maximum allowed time %dms\n",
>> + MTK_KPD_DEBOUNCE_MAX_MS);
>> + return -EINVAL;
>> + }
>> +
>> + wakeup = device_property_read_bool(&pdev->dev, "wakeup-source");
>> +
>> + dev_dbg(&pdev->dev, "n_row=%d n_col=%d debounce=%d\n",
>> + keypad->n_rows, keypad->n_cols, debounce);
>> +
>> + error = matrix_keypad_build_keymap(NULL, NULL,
>> + keypad->n_rows,
>> + keypad->n_cols,
>> + NULL,
>> + keypad->input_dev);
>> + if (error) {
>> + dev_err(&pdev->dev, "Failed to build keymap\n");
>> + return error;
>> + }
>> +
>> + regmap_write(keypad->regmap, MTK_KPD_DEBOUNCE,
>> + (debounce * (1 << 5)) & MTK_KPD_DEBOUNCE_MASK);
>> +
>> + keypad->clk = devm_clk_get(&pdev->dev, "kpd");
>> + if (IS_ERR(keypad->clk))
>> + return PTR_ERR(keypad->clk);
>> +
>> + error = clk_prepare_enable(keypad->clk);
>> + if (error) {
>> + dev_err(&pdev->dev, "cannot prepare/enable keypad clock\n");
>> + return error;
>> + }
>> +
>> + error = devm_add_action_or_reset(&pdev->dev, mt6779_keypad_clk_disable, keypad->clk);
>> + if (error)
>> + return error;
>> +
>> + irq = platform_get_irq(pdev, 0);
>> + if (irq < 0)
>> + return irq;
>> +
>> + error = devm_request_threaded_irq(&pdev->dev, irq, NULL, mt6779_keypad_irq_handler,
>> + IRQF_ONESHOT, MTK_KPD_NAME, keypad);
>> + if (error) {
>> + dev_err(&pdev->dev, "Failed to request IRQ#%d:%d\n", irq, error);
>> + return error;
>> + }
>> +
>> + error = input_register_device(keypad->input_dev);
>> + if (error) {
>> + dev_err(&pdev->dev, "Failed to register device\n");
>> + return error;
>> + }
>> +
>> + error = device_init_wakeup(&pdev->dev, wakeup);
>
> Whoops! Two spaces here! Please fix this typo.
It looks Dmitry fixed this already in his tree [1]
[1] https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git/commit/?h=next&id=f28af984e771efd1ded81b865b50fa13b69bcde5
>
> P.S.: Please add my email to the Cc's when you'll send the next version, so that
> I will be able to timely give you a R-b tag.
>
> Cheers,
> Angelo
More information about the linux-arm-kernel
mailing list