[PATCH 2/2] dt-bindings: phy: mediatek: Add YAML schema for PCIe PHY

[Krzysztof Kozlowski]

On 11/03/2022 14:35, Jianjun Wang wrote:
> Add YAML schema documentation for PCIe PHY on MediaTek chipsets.
> 
> Signed-off-by: Jianjun Wang <jianjun.wang at mediatek.com>
> ---
>  .../bindings/phy/mediatek,pcie-phy.yaml       | 71 +++++++++++++++++++
>  1 file changed, 71 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
> new file mode 100644
> index 000000000000..da15b4bf3117
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
> @@ -0,0 +1,71 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/mediatek,pcie-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek PCIe PHY Device Tree Binding

Title is for hardware, so s/Device Tree Binding//

> +
> +maintainers:
> +  - Jianjun Wang <jianjun.wang at mediatek.com>
> +
> +description: |
> +  The PCIe PHY supports physical layer functionality for PCIe Gen3 port.
> +
> +properties:
> +  compatible:
> +    const: mediatek,pcie-phy

Is it going to be exactly one pcie-phy for all Mediatek chipsets for
next years? Are you sure about that? It sounds highly unlikely....

> +
> +  reg:
> +    maxItems: 1
> +
> +  reg-names:
> +    items:
> +      - const: sif
> +
> +  "#phy-cells":
> +    const: 0
> +
> +  nvmem-cells:
> +    maxItems: 7
> +    description:
> +      Phandles to nvmem cell that contains the efuse data, if unspecified,
> +      default value is used.
> +
> +  nvmem-cell-names:
> +    items:
> +      - const: glb_intr
> +      - const: tx_ln0_pmos
> +      - const: tx_ln0_nmos
> +      - const: rx_ln0
> +      - const: tx_ln1_pmos
> +      - const: tx_ln1_nmos
> +      - const: rx_ln1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pciephy: phy at 11e80000 {
> +        compatible = "mediatek,pcie-phy";
> +        #phy-cells = <0>;
> +        reg = <0x11e80000 0x10000>;
> +        reg-names = "sif";
> +        nvmem-cells = <&pciephy_glb_intr>,
> +                      <&pciephy_tx_ln0_pmos>,
> +                      <&pciephy_tx_ln0_nmos>,
> +                      <&pciephy_rx_ln0>,
> +                      <&pciephy_tx_ln1_pmos>,
> +                      <&pciephy_tx_ln1_nmos>,
> +                      <&pciephy_rx_ln1>;
> +        nvmem-cell-names = "glb_intr", "tx_ln0_pmos",
> +                           "tx_ln0_nmos", "rx_ln0",
> +                           "tx_ln1_pmos", "tx_ln1_nmos",
> +                           "rx_ln1";
> +    };


Best regards,
Krzysztof