[PATCH v4] drivers/coresight: Add Ultrasoc System Memory Buffer driver
Suzuki K Poulose
suzuki.poulose at arm.com
Wed Mar 9 14:49:23 PST 2022
Hi
On 28/01/2022 06:17, Qi Liu wrote:
> This patch adds driver for Ultrasoc SMB(System Memory Buffer)
> device. SMB provides a way to buffer messages from ETM, and
> store these CPU instructions in system memory.
>
> SMB is developed by Ultrasoc technology, which is acquired by
> Siemens, and we still use "Ultrasoc" to name driver.
>
> Signed-off-by: Qi Liu <liuqi115 at huawei.com>
> Tested-by: JunHao He <hejunhao2 at hisilicon.com>
Please find my comments below. In general :
1) Please run checkpatch and fix the warnings
2) Add documentation for :
- A brief description of the device and the firmware bindings (see
comments below )
- Sysfs attributes
3) Other minor comments on the code
> ---
> Change since v3:
> - Modify the file header according to community specifications.
> - Address the comments from Mathieu.
> - Link:https://lore.kernel.org/linux-arm-kernel/20211118110016.40398-1-liuqi115@huawei.com/
> Change since v2:
> - Move ultrasoc driver to drivers/hwtracing/coresight.
> - Link:https://lists.linaro.org/pipermail/coresight/2021-November/007310.html
>
> Change since v1:
> - Drop the document of Ultrasoc according to Mathieu's comment.
> - Add comments to explain some private hardware settings.
> - Address the comments from Mathieu.
> - Link: https://lists.linaro.org/pipermail/coresight/2021-August/006842.html
>
> Change since RFC:
> - Move ultrasoc driver to drivers/hwtracing/coresight/ultrasoc.
> - Remove ultrasoc-axi-com.c, as AXI-COM doesn't need to be configured in
> basic tracing function.
> - Remove ultrasoc.c as SMB does not need to register with the ultrasoc core.
> - Address the comments from Mathieu and Suzuki.
> - Link: https://lists.linaro.org/pipermail/coresight/2021-June/006535.html
>
> drivers/hwtracing/coresight/Kconfig | 10 +
> drivers/hwtracing/coresight/Makefile | 1 +
> drivers/hwtracing/coresight/ultrasoc-smb.c | 602 +++++++++++++++++++++
> drivers/hwtracing/coresight/ultrasoc-smb.h | 100 ++++
> 4 files changed, 713 insertions(+)
> create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.c
> create mode 100644 drivers/hwtracing/coresight/ultrasoc-smb.h
>
> diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
> index 514a9b8086e3..32b87df9994a 100644
> --- a/drivers/hwtracing/coresight/Kconfig
> +++ b/drivers/hwtracing/coresight/Kconfig
> @@ -201,4 +201,14 @@ config CORESIGHT_TRBE
>
> To compile this driver as a module, choose M here: the module will be
> called coresight-trbe.
> +config ULTRASOC_SMB
> + tristate "Ultrasoc system memory buffer drivers"
> + depends on ARM64 && CORESIGHT_LINKS_AND_SINKS
Given that this driver absolutely only works with ACPI, please could
you add that dependency here ?
> + help
> + This driver provides support for the Ultrasoc system memory buffer (SMB).
> + SMB is responsible for receiving the trace data from Coresight ETM devices
> + and storing them to a system buffer.
> +
> + To compile this driver as a module, choose M here: the module will be
> + called ultrasoc-smb.
> endif
> diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
> index b6c4a48140ec..344dba8d6ff8 100644
> --- a/drivers/hwtracing/coresight/Makefile
> +++ b/drivers/hwtracing/coresight/Makefile
> @@ -27,3 +27,4 @@ obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o
> obj-$(CONFIG_CORESIGHT_TRBE) += coresight-trbe.o
> coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \
> coresight-cti-sysfs.o
> +obj-$(CONFIG_ULTRASOC_SMB) += ultrasoc-smb.o
> diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c
> new file mode 100644
> index 000000000000..a18d061aab61
> --- /dev/null
> +++ b/drivers/hwtracing/coresight/ultrasoc-smb.c
> @@ -0,0 +1,602 @@
> +// SPDX-License-Identifier: MIT/GPL
> +/*
> + * Siemens System Memory Buffer driver.
> + * Copyright(c) 2022, HiSilicon Limited.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/circ_buf.h>
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/platform_device.h>
> +
> +#include "ultrasoc-smb.h"
> +
> +DEFINE_CORESIGHT_DEVLIST(sink_devs, "smb");
minor nit: This name could be confused with SMB (samba) under linux
especially when it appears under /dev/smbN as a misc device.
> +
> +static bool smb_buffer_is_empty(struct smb_drv_data *drvdata)
> +{
> + u32 buf_status = readl(drvdata->base + SMB_LB_INT_STS);
> +
> + return buf_status & BIT(0) ? false : true;
> +}
> +
> +static bool smb_buffer_cmp_pointer(struct smb_drv_data *drvdata)
> +{
> + u32 wr_offset, rd_offset;
> +
> + wr_offset = readl(drvdata->base + SMB_LB_WR_ADDR);
> + rd_offset = readl(drvdata->base + SMB_LB_RD_ADDR);
> + return wr_offset == rd_offset;
> +}
> +
> +static void smb_reset_buffer_status(struct smb_drv_data *drvdata)
> +{
> + writel(0xf, drvdata->base + SMB_LB_INT_STS);
> +}
> +
> +/* Purge data remaining in hardware path to SMB. */
> +static void smb_purge_data(struct smb_drv_data *drvdata)
> +{
> + writel(0x1, drvdata->base + SMB_LB_PURGE);
> +}
> +
> +static void smb_update_data_size(struct smb_drv_data *drvdata)
> +{
> + struct smb_data_buffer *sdb = &drvdata->sdb;
> + u32 write_offset;
> +
> + smb_purge_data(drvdata);
> + if (smb_buffer_cmp_pointer(drvdata)) {
> + if (smb_buffer_is_empty(drvdata))
> + sdb->data_size = 0;
> + else
> + sdb->data_size = sdb->buf_size;
> + return;
> + }
> +
> + write_offset = readl(drvdata->base + SMB_LB_WR_ADDR) - sdb->start_addr;
> + sdb->data_size = CIRC_CNT(write_offset, sdb->rd_offset, sdb->buf_size);
> +}
> +
> +static int smb_open(struct inode *inode, struct file *file)
> +{
> + struct smb_drv_data *drvdata = container_of(file->private_data,
> + struct smb_drv_data, miscdev);
> +
> + if (local_cmpxchg(&drvdata->reading, 0, 1))
> + return -EBUSY;
> +
> + return 0;
> +}
> +
> +static ssize_t smb_read(struct file *file, char __user *data, size_t len, loff_t *ppos)
> +{
> + struct smb_drv_data *drvdata = container_of(file->private_data,
> + struct smb_drv_data, miscdev);
> + struct smb_data_buffer *sdb = &drvdata->sdb;
> + struct device *dev = &drvdata->csdev->dev;
> + unsigned long flags;
> + int to_copy = 0;
> +
> + spin_lock_irqsave(&drvdata->spinlock, flags);
> +
> + if (!sdb->data_size) {
> + smb_update_data_size(drvdata);
> + if (!sdb->data_size)
> + goto out;
> + }
> +
> + if (atomic_read(drvdata->csdev->refcnt)) {
> + to_copy = -EBUSY;
> + goto out;
> + }
> +
Shouldn't this be performed *before* updating the data_size above ?
Looking at the smb_update_data_size() it "purges" the data. Is that
acceptable ?
> + to_copy = min(sdb->data_size, len);
> +
> + /* Copy parts of trace data when the read pointer will wrap around SMB buffer. */
> + if (sdb->rd_offset + to_copy > sdb->buf_size)
> + to_copy = sdb->buf_size - sdb->rd_offset;
> +
> + if (copy_to_user(data, (void *)sdb->buf_base + sdb->rd_offset, to_copy)) {
> + dev_dbg(dev, "Failed to copy data to user\n");
> + to_copy = -EFAULT;
> + goto out;
> + }
> +
> + *ppos += to_copy;
> + sdb->data_size -= to_copy;
> + sdb->rd_offset += to_copy;
> + sdb->rd_offset %= sdb->buf_size;
> + writel(sdb->start_addr + sdb->rd_offset, drvdata->base + SMB_LB_RD_ADDR);
> + dev_dbg(dev, "%d bytes copied\n", to_copy);
> +out:
> + if (!sdb->data_size)
> + smb_reset_buffer_status(drvdata);
> + spin_unlock_irqrestore(&drvdata->spinlock, flags);
> + return to_copy;
> +}
> +
> +static int smb_release(struct inode *inode, struct file *file)
> +{
> + struct smb_drv_data *drvdata = container_of(file->private_data,
> + struct smb_drv_data, miscdev);
> + local_set(&drvdata->reading, 0);
> + return 0;
> +}
> +
> +static const struct file_operations smb_fops = {
> + .owner = THIS_MODULE,
> + .open = smb_open,
> + .read = smb_read,
> + .release = smb_release,
> + .llseek = no_llseek,
> +};
> +
> +smb_reg(read_pos, SMB_LB_RD_ADDR);
> +smb_reg(write_pos, SMB_LB_WR_ADDR);
> +smb_reg(buf_status, SMB_LB_INT_STS);
> +
> +static ssize_t buf_size_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(dev->parent);
> +
> + return sysfs_emit(buf, "0x%lx\n", drvdata->sdb.buf_size);
> +}
> +static DEVICE_ATTR_RO(buf_size);
> +
> +static struct attribute *smb_sink_attrs[] = {
> + &dev_attr_read_pos.attr,
> + &dev_attr_write_pos.attr,
> + &dev_attr_buf_status.attr,
> + &dev_attr_buf_size.attr,
> + NULL,
> +};
Please could you also update the sysfs ABI files with a brief
description of the above attributes ?
e.g., Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
> +
> +static const struct attribute_group smb_sink_group = {
> + .attrs = smb_sink_attrs,
> + .name = "status",
> +};
> +
> +static const struct attribute_group *smb_sink_groups[] = {
> + &smb_sink_group,
> + NULL,
> +};
> +
> +static int smb_set_perf_buffer(struct perf_output_handle *handle)
> +{
> + struct cs_buffers *buf = etm_perf_sink_config(handle);
> + u32 head;
> +
> + if (!buf)
> + return -EINVAL;
> +
> + /* Wrap head around to the amount of space we have */
> + head = handle->head & ((buf->nr_pages << PAGE_SHIFT) - 1);
> +
> + /* Find the page to write to and offset within that page */
> + buf->cur = head / PAGE_SIZE;
> + buf->offset = head % PAGE_SIZE;
> +
> + local_set(&buf->data_size, 0);
> +
> + return 0;
> +}
> +
> +static void smb_enable_hw(struct smb_drv_data *drvdata)
> +{
> + writel(0x1, drvdata->base + SMB_GLOBAL_EN);
> +}
> +
> +static void smb_disable_hw(struct smb_drv_data *drvdata)
> +{
> + writel(0x0, drvdata->base + SMB_GLOBAL_EN);
> +}
> +
> +static int smb_enable_sysfs(struct smb_drv_data *drvdata)
> +{
> + if (drvdata->mode == CS_MODE_PERF)
> + return -EBUSY;
> +
> + if (drvdata->mode == CS_MODE_SYSFS)
> + return 0;
> +
> + smb_enable_hw(drvdata);
> + drvdata->mode = CS_MODE_SYSFS;
> + return 0;
> +}
> +
> +static int smb_enable_perf(struct smb_drv_data *drvdata, void *data)
> +{
> + struct device *dev = &drvdata->csdev->dev;
> + struct perf_output_handle *handle = data;
> + pid_t pid;
> +
> + if (drvdata->mode == CS_MODE_SYSFS) {
> + dev_err(dev, "Device is already in used by sysfs\n");
Please could you convert this to dev_dbg() ? An -EBUSY should
be sufficient to indicate that the resource is busy.
> + return -EBUSY;
> + }
> +
> + /* Get a handle on the pid of the target process*/
> + pid = task_pid_nr(handle->event->owner);
> + if (drvdata->pid != -1 && drvdata->pid != pid) {
> + dev_err(dev, "Device is already in used by other session\n");
Same here.
> + return -EBUSY;
> + }
> + /* The sink is already enabled by this session. */
> + if (drvdata->pid == pid)
> + return 0;
If the sink is shared by multiple events of the same group, don't
we need a refcount to make sure we don't disable the buffer when
an event goes away ?
> +
> + if (smb_set_perf_buffer(handle))
> + return -EINVAL;
> +
> + smb_enable_hw(drvdata);
> + drvdata->pid = pid;
> + drvdata->mode = CS_MODE_PERF;
> +
> + return 0;
> +}
> +
> +static int smb_enable(struct coresight_device *csdev, u32 mode, void *data)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
> + unsigned long flags;
> + int ret = -EINVAL;
> +
> + /* Do nothing if trace data is reading by other interface now. */
> + if (local_read(&drvdata->reading))
> + return -EBUSY;
> +
> + spin_lock_irqsave(&drvdata->spinlock, flags);
> +
> + if (mode == CS_MODE_SYSFS)
> + ret = smb_enable_sysfs(drvdata);
> +
> + if (mode == CS_MODE_PERF)
> + ret = smb_enable_perf(drvdata, data);
> +
> + spin_unlock_irqrestore(&drvdata->spinlock, flags);
> +
> + if (ret)
> + return ret;
> +
> + atomic_inc(csdev->refcnt);
> + dev_dbg(&csdev->dev, "Ultrasoc SMB enabled\n");
> +
> + return 0;
> +}
> +
> +static int smb_disable(struct coresight_device *csdev)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
> + unsigned long flags;
> +
> + spin_lock_irqsave(&drvdata->spinlock, flags);
> +
> + if (atomic_dec_return(csdev->refcnt)) {
We need to increment the refcnt for every event that shares the
sink for perf mode. Please see my comments above.
> + spin_unlock_irqrestore(&drvdata->spinlock, flags);
> + return -EBUSY;
> + }
> +
> + WARN_ON_ONCE(drvdata->mode == CS_MODE_DISABLED);
> + smb_disable_hw(drvdata);
> +
> + /*
> + * Data remaining in hardware path will be sent to SMB after purge, so needs to
> + * synchronize the read pointer to write pointer in perf mode.
Please run checkpatch on your submission ^^^
> + */
> + smb_purge_data(drvdata);
> + if (drvdata->mode == CS_MODE_PERF)
> + writel(readl(drvdata->base + SMB_LB_WR_ADDR), drvdata->base + SMB_LB_RD_ADDR);
Same here. Why don't we do this for CS_MODE_SYSFS ?
> +
> + /* Dissociate from the target process. */
> + drvdata->pid = -1;
> + drvdata->mode = CS_MODE_DISABLED;
> + spin_unlock_irqrestore(&drvdata->spinlock, flags);
> +
> + dev_dbg(&csdev->dev, "Ultrasoc SMB disabled\n");
> + return 0;
> +}
> +
> +static void *smb_alloc_buffer(struct coresight_device *csdev,
> + struct perf_event *event, void **pages,
> + int nr_pages, bool overwrite)
> +{
> + struct cs_buffers *buf;
> + int node;
> +
> + node = (event->cpu == -1) ? NUMA_NO_NODE : cpu_to_node(event->cpu);
> + buf = kzalloc_node(sizeof(*buf), GFP_KERNEL, node);
> + if (!buf)
> + return NULL;
> +
> + buf->snapshot = overwrite;
> + buf->nr_pages = nr_pages;
> + buf->data_pages = pages;
> +
> + return buf;
> +}
> +
> +static void smb_free_buffer(void *config)
> +{
> + struct cs_buffers *buf = config;
> +
> + kfree(buf);
> +}
> +
> +static void smb_sync_perf_buffer(struct smb_drv_data *drvdata,
> + struct cs_buffers *buf, unsigned long data_size)
> +{
> + struct smb_data_buffer *sdb = &drvdata->sdb;
> + char **dst_pages = (char **)buf->data_pages;
> + unsigned long buf_offset = buf->offset;
Please could you rename this to page_offset ?
> + unsigned int cur = buf->cur;
> + unsigned long to_copy;
> +
> + while (data_size) {
> + /* Copy parts of trace data when the read pointer will wrap around SMB buffer. */
Wrap the lines please.
Please could you do :
unsigned long page_space = (PAGE_SIZE - page_offset);
> + if (sdb->rd_offset + PAGE_SIZE - buf_offset > sdb->buf_size)
^^ if (sdb->rd_offset + page_space > sdb->buf_size)
> + to_copy = sdb->buf_size - sdb->rd_offset;
> + else
> + to_copy = min(data_size, PAGE_SIZE - buf_offset);
to_copy = min(data_size, page_space);
> +
> + memcpy_fromio(dst_pages[cur] + buf_offset, sdb->buf_base + sdb->rd_offset, to_copy);
memcpy_fromio(dst_pages[cur] + page_offset, ...
> +
> + buf_offset += to_copy;
> + if (buf_offset >= PAGE_SIZE) {
That becomes much simpler to follow with the rename to page_offset.
> + buf_offset = 0;
> + cur++;
> + cur %= buf->nr_pages;
> + }
> + data_size -= to_copy;
> + /* ensure memcpy finished before update the read pointer */
Why and how ?
> + sdb->rd_offset += to_copy;
> + sdb->rd_offset %= sdb->buf_size;
> + }
> +
> + sdb->data_size = 0;
> + writel(sdb->start_addr + sdb->rd_offset, drvdata->base + SMB_LB_RD_ADDR);
> + smb_reset_buffer_status(drvdata);
> +}
> +
> +static unsigned long smb_update_buffer(struct coresight_device *csdev,
> + struct perf_output_handle *handle,
> + void *sink_config)
> +{
> + struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent);
> + struct smb_data_buffer *sdb = &drvdata->sdb;
> + struct cs_buffers *buf = sink_config;
> + unsigned long data_size = 0;
> + unsigned long flags;
> + bool lost = false;
> +
> + if (!buf)
> + return 0;
> +
> + spin_lock_irqsave(&drvdata->spinlock, flags);
> +
> + /* Don't do anything if another tracer is using this sink. */
> + if (atomic_read(csdev->refcnt) != 1)
> + goto out;
> +
> + smb_update_data_size(drvdata);
> + data_size = sdb->data_size;
Please could you add in a comment on what we do here below ?
> + if (data_size > handle->size) > + sdb->rd_offset += data_size - handle->size;
> + sdb->rd_offset %= sdb->buf_size;
> + data_size = handle->size;
> + lost = true;
> + }
> +
> + smb_sync_perf_buffer(drvdata, buf, data_size);
> + if (!buf->snapshot && lost)
> + perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
> +
> +out:
> + spin_unlock_irqrestore(&drvdata->spinlock, flags);
> + return data_size;
> +}
> +
> +static const struct coresight_ops_sink smb_cs_ops = {
> + .enable = smb_enable,
> + .disable = smb_disable,
> + .alloc_buffer = smb_alloc_buffer,
> + .free_buffer = smb_free_buffer,
> + .update_buffer = smb_update_buffer,
> +};
> +
> +static const struct coresight_ops cs_ops = {
> + .sink_ops = &smb_cs_ops,
> +};
> +
> +static int smb_init_data_buffer(struct platform_device *pdev, struct smb_data_buffer *sdb)
> +{
> + struct resource *res;
> + void __iomem *base;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
What are these IO bases ? What does 0 stand for ? What is 1 for ?
Please could you add a documentation under
Documentation/trace/coresight/.
Doesn't need to be too detailed. But a basic description would be helpful.
> + if (IS_ERR(res)) {
> + dev_err(&pdev->dev, "SMB device failed to get resource\n");
> + return -EINVAL;
> + }
> +
> + sdb->start_addr = res->start & SMB_BASE_LOW_MASK;
> + sdb->buf_size = resource_size(res);
> + if (sdb->buf_size == 0)
> + return -EINVAL;
> +
> + base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + sdb->buf_base = base;
> +
> + return 0;
> +}
> +
> +static void smb_init_hw(struct smb_drv_data *drvdata)
> +{
> + u32 value;
> +
> + /* First disable smb and clear the status of SMB buffer */
> + smb_reset_buffer_status(drvdata);
> + smb_disable_hw(drvdata);
> + smb_purge_data(drvdata);
> +
> + /* Using smb in single-end mode, and set other configures default */
> + value = SMB_BUF_CFG_STREAMING | SMB_BUF_SINGLE_END | SMB_BUF_EN;
> + writel(value, drvdata->base + SMB_LB_CFG_LO);
> + value = SMB_MSG_FILTER(0x0, 0xff);
Could we not simply say :
> + writel(value, drvdata->base + SMB_LB_CFG_HI);
> +
#define SMB_CFG_MSG_FILTER 0xff00
writel(SMB_CFG_MSG_FILTER, drvdata->base + SMB_LB_CFG_HI) ?
Just like you do below for the other registers ? Anyways, none of these
values make any sense to the reader without the Reference Manual. The
best you could do is stick a sensible name for the value like you do
below.
> + writel(SMB_GLOBAL_CFG, drvdata->base + SMB_CFG_REG);
> + writel(SMB_GLB_INT_CFG, drvdata->base + SMB_GLOBAL_INT);
> + writel(SMB_BUF_INT_CFG, drvdata->base + SMB_LB_INT_CTRL);
> +}
> +
> +static int smb_register_sink(struct platform_device *pdev, struct smb_drv_data *drvdata)
> +{
> + struct coresight_platform_data *pdata = NULL;
> + struct coresight_desc desc = { 0 };
> + int ret;
> +
> + pdata = coresight_get_platform_data(&pdev->dev);
> + if (IS_ERR(pdata))
> + return PTR_ERR(pdata);
> +
> + desc.type = CORESIGHT_DEV_TYPE_SINK;
> + desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_BUFFER;
> + desc.ops = &cs_ops;
> + desc.pdata = pdata;
> + desc.dev = &pdev->dev;
> + desc.groups = smb_sink_groups; > + desc.name = coresight_alloc_device_name(&sink_devs, &pdev->dev);
> + if (!desc.name) {
> + dev_err(&pdev->dev, "Failed to alloc coresight device name");
> + return -ENOMEM;
> + }
> +
> + drvdata->csdev = coresight_register(&desc);
> + if (IS_ERR(drvdata->csdev))
> + return PTR_ERR(drvdata->csdev);
> +
> + drvdata->miscdev.name = desc.name;
> + drvdata->miscdev.minor = MISC_DYNAMIC_MINOR;
> + drvdata->miscdev.fops = &smb_fops;
> + ret = misc_register(&drvdata->miscdev);
> + if (ret) {
> + coresight_unregister(drvdata->csdev);
> + dev_err(&pdev->dev, "Failed to register misc: %d\n", ret);
> + }
> +
> + return ret;
> +}
> +
> +static void smb_unregister_sink(struct smb_drv_data *drvdata)
> +{
> + misc_deregister(&drvdata->miscdev);
> + coresight_unregister(drvdata->csdev);
> +}
> +
> +/*
> + * Send ultrasoc messge to control hardwares on the tracing path,
> + * using DSM calls to avoid exposing ultrasoc message format.
> + */
> +static int smb_config_inport(struct device *dev, bool enable)
> +{
> + u32 flag = enable ? 1 : 0;
> + union acpi_object *obj;
> + guid_t guid;
> +
> + if (guid_parse("82ae1283-7f6a-4cbe-aa06-53e8fb24db18", &guid)) {
Please could you add symbolic name for this UUID string and a comment on
what this will do ?
> + dev_err(dev, "Get GUID failed\n");
> + return -EINVAL;
> + }
> +
> + obj = acpi_evaluate_dsm(ACPI_HANDLE(dev), &guid, 0, flag, NULL);
What are the parameters ? What do they mean ?
> + if (!obj)
> + dev_err(dev, "ACPI handle failed\n");
> + else
> + ACPI_FREE(obj);
> +
> + return 0;
> +}
> +
> +static int smb_probe(struct platform_device *pdev)
> +{
> + struct smb_drv_data *drvdata;
> + int ret;
> +
> + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
> + if (!drvdata)
> + return -ENOMEM;
> +
> + drvdata->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(drvdata->base)) {
> + dev_err(&pdev->dev, "Failed to ioremap resource\n");
> + return PTR_ERR(drvdata->base);
> + }
> +
> + ret = smb_init_data_buffer(pdev, &drvdata->sdb);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to init buffer: %d\n", ret);
> + return ret;
> + }
> +
> + smb_init_hw(drvdata);
> + spin_lock_init(&drvdata->spinlock);
> + drvdata->pid = -1;
> +
> + ret = smb_register_sink(pdev, drvdata);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to register smb sink\n");
> + return ret;
> + }
> +
> + ret = smb_config_inport(&pdev->dev, true);
> + if (ret) {
> + smb_unregister_sink(drvdata);
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, drvdata);
> + return 0;
> +}
> +
> +static int smb_remove(struct platform_device *pdev)
> +{
> + struct smb_drv_data *drvdata = platform_get_drvdata(pdev);
> + int ret;
> +
> + ret = smb_config_inport(&pdev->dev, false);
> + if (ret)
> + return ret;
> +
> + smb_unregister_sink(drvdata);
> + return 0;
> +}
> +
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id ultrasoc_smb_acpi_match[] = {
> + {"HISI03A1", 0},
> + {},
> +};
> +MODULE_DEVICE_TABLE(acpi, ultrasoc_smb_acpi_match);
> +#endif
As mentioned above this driver must depend on the ACPI and thus
you may remove the #ifdef
> +
> +static struct platform_driver smb_driver = {
> + .driver = {
> + .name = "ultrasoc-smb",
> + .acpi_match_table = ACPI_PTR(ultrasoc_smb_acpi_match),
> + .suppress_bind_attrs = true,
> + },
> + .probe = smb_probe,
> + .remove = smb_remove,
> +};
> +module_platform_driver(smb_driver);
> +
> +MODULE_DESCRIPTION("Ultrasoc smb driver");
> +MODULE_LICENSE("Dual MIT/GPL");
> +MODULE_AUTHOR("Jonathan Zhou <jonathan.zhouwen at huawei.com>");
> +MODULE_AUTHOR("Qi Liu <liuqi115 at huawei.com>");
> diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.h b/drivers/hwtracing/coresight/ultrasoc-smb.h
> new file mode 100644
> index 000000000000..a7c76140ee46
> --- /dev/null
> +++ b/drivers/hwtracing/coresight/ultrasoc-smb.h
> @@ -0,0 +1,100 @@
> +/* SPDX-License-Identifier: MIT */
> +/*
> + * Siemens System Memory Buffer driver.
> + * Copyright(c) 2022, HiSilicon Limited.
> + */
> +
> +#ifndef _ULTRASOC_SMB_H
> +#define _ULTRASOC_SMB_H
> +
> +#include <linux/coresight.h>
> +#include <linux/list.h>
> +#include <linux/miscdevice.h>
> +
> +#include "coresight-etm-perf.h"
> +#include "coresight-priv.h"
> +
> +/* Offset of SMB logical buffer registers */
> +#define SMB_CFG_REG 0X0
> +#define SMB_GLOBAL_EN 0X4
> +#define SMB_GLOBAL_INT 0X8
> +#define SMB_LB_CFG_LO 0X40
> +#define SMB_LB_CFG_HI 0X44
> +#define SMB_LB_INT_CTRL 0X48
> +#define SMB_LB_INT_STS 0X4C
> +#define SMB_LB_LIMIT 0X58
> +#define SMB_LB_RD_ADDR 0X5C
> +#define SMB_LB_WR_ADDR 0X60
> +#define SMB_LB_PURGE 0X64
> +
> +/* Set SMB_CFG_REG register */
> +#define SMB_IDLE_PRD(period) ((((period) - 216) & 0xf) << 12)
> +#define SMB_MEM_WR(credit, rate) (((credit) << 16) | ((rate) << 18))
> +#define SMB_MEM_RD(credit, rate) (((credit) << 22) | ((rate) << 24))
> +#define SMB_BURST_LEN(len) (((len) - 1) << 4)
> +#define SMB_GLOBAL_CFG (SMB_IDLE_PRD(231) | SMB_MEM_WR(0x3, 0x0) | \
> + SMB_MEM_RD(0x3, 0x6) | SMB_BURST_LEN(16))
> +
> +/* Set SMB_GLOBAL_INT register */
> +#define SMB_INT_EN BIT(0)
> +#define SMB_INT_TYPE_PULSE BIT(1)
> +#define SMB_INT_POLARITY_HIGH BIT(2)
> +#define SMB_GLB_INT_CFG (SMB_INT_EN | SMB_INT_TYPE_PULSE | SMB_INT_POLARITY_HIGH)
> +
> +/* Set SMB_LB_CFG_LO register */
> +#define SMB_BUF_EN BIT(0)
> +#define SMB_BUF_SINGLE_END BIT(1)
> +#define SMB_BUF_INIT BIT(8)
> +#define SMB_BUF_CONTINUOUS BIT(11)
> +#define SMB_FLOW_MASK GENMASK(19, 16)
> +#define SMB_BUF_CFG_STREAMING (SMB_BUF_INIT | SMB_BUF_CONTINUOUS | SMB_FLOW_MASK)
> +#define SMB_BASE_LOW_MASK GENMASK(31, 0)
> +
> +/* Set SMB_LB_CFG_HI register */
> +#define SMB_MSG_FILTER(lower, upper) (((lower) & 0xff) | (((upper) & 0xff) << 8))
There is only one place where this is used and it is unnecessarily
confusing. Why not simply define:
#define SMB_CFG_MSG_FILTER 0xff00
> +#define SMB_BUF_INT_EN BIT(0)
> +#define SMB_BUF_NOTE_MASK GENMASK(11, 8)
> +#define SMB_BUF_INT_CFG (SMB_BUF_INT_EN | SMB_BUF_NOTE_MASK)
> +
> +/**
> + * struct smb_data_buffer - Details of the buffer used by SMB
> + * @buf_base : Memory mapped base address of SMB.
> + * @start_addr : SMB buffer start Physical address.
> + * @buf_size : Size of the buffer.
> + * @data_size : Size of Trace data copy to userspace.
> + * @rd_offset : Offset of the read pointer in the buffer.
> + */
> +struct smb_data_buffer {
> + void __iomem *buf_base;
> + u32 start_addr;
> + unsigned long buf_size;
> + unsigned long data_size;
> + unsigned long rd_offset;
> +};
> +
> +/**
> + * struct smb_drv_data - specifics associated to an SMB component
> + * @base : Memory mapped base address for SMB component.
> + * @csdev : Component vitals needed by the framework.
> + * @sdb : Data buffer for SMB.
> + * @miscdev : Specifics to handle "/dev/smb" entry.
> + * @spinlock : Only one at a time pls.
> + * @reading : Synchronise user space access to SMB buffer.
> + * @pid : Process ID of the process being monitored by the session
> + * that is using this component.
> + * @mode : how this SMB is being used, perf mode or sysfs mode.
> + */
> +struct smb_drv_data {
> + void __iomem *base;
> + struct coresight_device *csdev;
> + struct smb_data_buffer sdb;
> + struct miscdevice miscdev;
> + spinlock_t spinlock;
> + local_t reading;
> + pid_t pid;
> + u32 mode;
> +};
> +
> +#define smb_reg(name, offset) coresight_simple_reg32(struct smb_drv_data, name, offset)
> +
> +#endif
Suzuki
More information about the linux-arm-kernel
mailing list