[PATCH 2/2] arm64: dts: seattle: Update spi node properties

[Kuldeep Singh]

PL022 binding require two clocks to be defined but AMD seattle platform
does't comply with binding and define only one clock.

Update spi clocks and clocks-names property by adding appropriate clock
reference to make it compliant with bindings.

CC: Tom Lendacky <thomas.lendacky at amd.com>
Signed-off-by: Kuldeep Singh <singh.kuldeep87k at gmail.com>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index b664e7af74eb..2aa21d98d560 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -113,8 +113,8 @@ spi0: spi at e1020000 {
 			reg = <0 0xe1020000 0 0x1000>;
 			spi-controller;
 			interrupts = <0 330 4>;
-			clocks = <&uartspiclk_100mhz>;
-			clock-names = "apb_pclk";
+			clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		spi1: spi at e1030000 {
@@ -123,8 +123,8 @@ spi1: spi at e1030000 {
 			reg = <0 0xe1030000 0 0x1000>;
 			spi-controller;
 			interrupts = <0 329 4>;
-			clocks = <&uartspiclk_100mhz>;
-			clock-names = "apb_pclk";
+			clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
+			clock-names = "sspclk", "apb_pclk";
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.25.1